St. Claude

1007 Independence Street is in St. Claude, zoned HMR-3 (Marigny, Tremé and Bywater single- and two-family homes, with some small multi-family buildings). It is in the Bywater historic district under full HDLC control, so most exterior changes need approval first. The city has 10 permits on record here; the most recent, a mechanical HVAC permit, was filed in February 2024. 9 are still open. On this block in the past year: 12 requests to 311 and 4 calls to police.

Zoning
HMR-3
Historic district
Bywater (Full control)
National Register
Bywater Historic District
Council district
C
Ward
9
Lot size
3,202 sq ft
Parcel
41066304

Everything on record here

10 records, newest first · 9 open

  1. Permit Mechanical HVAC Permit Issued

    Repairs to Vandalized Air Condition Equipment. Downstairs System: Remove and Install New 4 Ton Evaporator Coil, New Supply Plenum. Install All Supply and Return Air Grills. Install 3 1/2 Ton Condenser. Repair Damaged Copper Lines. Install WiFi Thermostat. Upstairs System: Remove and Install New 2 Ton Evaporator Coil. Install All Grills. Install 2 Ton Condenser. Repair Damaged Copper Lines. Install WiFi Thermostat.

    Permit
    24-03307-HVAC
    Type
    Mechanical HVAC
    Work
    Mechanical HVAC
    Estimated cost (applicant’s figure)
    $12,200
    Fees
    $63
    Contractor
    Ross Carroll Rouyer
    Days from application to issue
    6
    Expires
    Aug 8, 2024
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date

    See this permit on One Stop

  2. Permit Mechanical Fuel Gas Permit Issued

    install new gasline and two gas w/heater.

    Permit
    18-21395-FGAS
    Type
    Mechanical Fuel Gas
    Work
    Mechanical Fuel Gas
    Estimated cost (applicant’s figure)
    $750
    Fees
    $55
    Days from application to issue
    0
    Expires
    Dec 27, 2018
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  3. Permit Electrical Repair / Replacement / Addition Permit Issued

    Re-Wire .

    Permit
    18-20676-ERPR
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $160
    Contractor
    Exilus Louis Sr.
    Days from application to issue
    0
    Expires
    Dec 21, 2018
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  4. Permit Renovation (Structural) In Review

    Construct 636 sq ft 2-story addition to existing 1459 sq ft single-family dwelling as per plans.Extend permit 6 months to 11-15-18. Extend permit 6 months to 9/8/2019 Extend permit (8) 180 day periods to February 2, 2024.

    Permit
    16-22889-RNVS
    Type
    Renovation (Structural)
    Work
    Renovation (Structural)
    Estimated cost (applicant’s figure)
    $247,760
    Fees
    $3,037
    Contractor
    Samuel A Bavido, Galaforo Construction LLC
    Days from application to issue
    37
    Expires
    Feb 17, 2018

    See this permit on One Stop

  5. Permit HDLC COA Permit Issued

    Renovation and camelback addition to existing one-story building.

    Permit
    16-22889-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    299
    Expires
    Nov 8, 2017

    See this permit on One Stop

  6. Permit General Mechanical Permit Issuance - Active

    INSTALL ELEC WAF, ELEC W/H AND A\C. EDMOND ROUYER (#14655) *10BLD-06874

    Permit
    11MCH-01535
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $95
    Contractor
    Gentilly Appliance Repair Services LLC
    Days from application to issue
    0
  7. Permit Electrical Service / Circuit / Feeder Permit Issuance - Active

    REWIRE & LOW VOLTAGE- 10BLD-06874

    Permit
    11ELC-01954
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $136
    Contractor
    Herman L. Mcclain Jr.
    Days from application to issue
    0
  8. Permit Emergency Permit Permit Issuance - Active

    SUPPLEMENTAL PERMIT TO FINISH HURRICANE KATRINA REPAIRS.

    Permit
    10BLD-06874
    Type
    Emergency Permit
    Work
    Emergency Permit
    Estimated cost (applicant’s figure)
    $1,000
    Fees
    $65
    Days from application to issue
    0
  9. Permit Residential APPROVAL

    Katrina Repairs

    Permit
    ACCELA-81375
    Type
    Residential
    Work
    Repair
    Estimated cost (applicant’s figure)
    $10,000
  10. Permit General Mechanical Meter Release - Released

    RLB//TED'S PLMBG////#5950//OOS OVER 6 MONS

    Permit
    06MCH-02572
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Glen Harris Electric
    Days from application to issue
    5