St. Claude

910 Lesseps Street is in St. Claude, zoned HMR-3 (Marigny, Tremé and Bywater single- and two-family homes, with some small multi-family buildings). It is in the Bywater historic district under full HDLC control, so most exterior changes need approval first. The city has 5 permits on record here; the most recent, a general mechanical permit, was filed in September 2014. 3 are still open. On this block in the past year: 6 requests to 311 and 3 calls to police.

Zoning
HMR-3
Historic district
Bywater (Full control)
National Register
Bywater Historic District
Council district
C
Ward
9
Lot size
1,651 sq ft
Parcel
41068012

Everything on record here

5 records, newest first · 3 open

  1. Permit General Mechanical Permit Finaled

    install gas warm air furnace and 3-ton a/c. Raymond Stilley (#4673) cell 14-8712-Rnvn -- 14-16284-Mech

    Permit
    14-27308-MECH
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $65
    Contractor
    Raymond Stilley Jr.
    Days from application to issue
    43
    Expires
    Apr 15, 2015

    See this permit on One Stop

  2. Permit General Mechanical Permit Finaled

    gas test m haydel 913-3467 ck#10610 RELEASED METER

    Permit
    14-16284-MECH
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Mathew J Haydel
    Days from application to issue
    0
    Expires
    Nov 23, 2014

    See this permit on One Stop

  3. Permit Construction Loop Permit Issued

    TEMP POLE- 14-08712

    Permit
    14-09140-LOOP
    Type
    Construction Loop
    Work
    Construction Loop
    Estimated cost (applicant’s figure)
    $0
    Fees
    $40
    Contractor
    Don Charles Davis
    Days from application to issue
    0
    Expires
    Sep 21, 2014

    See this permit on One Stop

  4. Permit Electrical Service / Circuit / Feeder Permit Issued

    RENOVATIONS- 14-08712

    Permit
    14-09141-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $100
    Contractor
    Don Charles Davis
    Days from application to issue
    0
    Expires
    Sep 21, 2014

    See this permit on One Stop

  5. Permit Renovation (Non-Structural) Permit Issued

    Non-structural repairs to single family residence. Repairs will include new kitchen, electrical, plumbing, bath, side porch, doors, and floors. No exterior work allowed under this permit.

    Permit
    14-08712-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $50,000
    Fees
    $310
    Days from application to issue
    0
    Expires
    Sep 19, 2014

    See this permit on One Stop