Marigny

617 Marigny Street is in Marigny, zoned HMR-3 (Marigny, Tremé and Bywater single- and two-family homes, with some small multi-family buildings). It is in the Faubourg Marigny historic district under full HDLC control, so most exterior changes need approval first. The city has 2 permits on record here; the most recent, an HDLC COA permit, was filed in February 2025. On this block in the past year: 7 requests to 311 and 4 calls to police.

Zoning
HMR-3
Historic district
Faubourg Marigny (Full control)
National Register
Faubourg Marigny Historic District
Council district
C
Ward
8
Lot size
4,256 sq ft
Parcel
41068021

Everything on record here

2 records, newest first

  1. Permit HDLC COA Other

    Remove old roofing materials down to bare deck. Install 7/16" OSB over entire roof using 3" ring shank nails. Install 2 layers OC Rhino synthetic felt over entire roof per state code. Install OC Rhino ice and water around penetrations. Install 26 gauge drip edger and OC Starter Plus starter on all rakes and eves. Install OC Duration Onyx Black shingles over main body of roof (approximately 15 squares with waste). Install OC Pro edge on all hips and ridges. Install new plumbing boots. Remove 4 turbines and replace them with Lamance 750 vents per HDLC code. Haul away all project debris.

    Permit
    25-05727-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Aug 24, 2025

    See this permit on One Stop

  2. Permit Renovation (Non-Structural) Permit Cancelled

    After-the-fact application to remove old roofing materials down to bare deck. Install 7/16" OSB over entire roof using 3" ring shank nails. Install 2 layers OC Rhino synthetic felt over entire roof per state code. Install OC Rhino ice and water around penetrations. Install 26 gauge drip edger and OC Starter Plus starter on all rakes and eves. Install OC Duration Onyx Black shingles over main body of roof (approximately 15 squares with waste). Install OC Pro edge on all hips and ridges. Install new plumbing boots. Remove 4 turbines and replace them with Lamance 750 vents per HDLC code. Haul away all project debris.

    Permit
    25-05727-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $10,350
    Fees
    $263
    Contractor
    Shifflett Exteriors LLC
    1. Application submitted
    2. Zoning review
    3. Application review
    4. Plan review
    5. Permit approved

    See this permit on One Stop