St. Roch

1838 Marigny Street is in St. Roch, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). The city has 10 permits on record here; the most recent, an electrical service / circuit / feeder permit, was filed in November 2019. 7 are still open. There were 2 past code enforcement cases, the latest in April 2009, all closed. On this block in the past year: 8 requests to 311 and 12 calls to police.

Zoning
HU-RD2
Historic district
None
National Register
New Marigny Historic District
Council district
D
Ward
8
Lot size
2,118 sq ft
Parcel
41069665

Everything on record here

12 records, newest first · 7 open

  1. Permit Electrical Service / Circuit / Feeder Permit Issued

    Furnish and install a new 200 amp two gang meter can, connecting to the existing left breaker panel for the other address, and a 200 amp 30 circuit main breaker outdoor panel, with new breakers connecting to the existing branch circuits, leaving room for additional circuits, marking the existing circuits for easy identification, with a new larger overhead conduit and cables. Will correct the main ground system by installing two ground rods, ground wire bonding to the necessary main electrical service components, and a ground bridge for communication companies to correctly ground their equipment.

    Permit
    19-35765-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $1,910
    Fees
    $100
    Contractor
    WILLIAM Floyd Schell III
    Days from application to issue
    4
    Expires
    May 11, 2020
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  2. Permit Electrical Service / Circuit / Feeder Permit Issued

    Furnish and install a new 200 amp two gang meter can, connecting to the existing left breaker panel for the other address, and a 200 amp 30 circuit main breaker outdoor panel, with new breakers connecting to the existing branch circuits, leaving room for additional circuits, marking the existing circuits for easy identification, with a new larger overhead conduit and cables. Will correct the main ground system by installing two ground rods, ground wire bonding to the necessary main electrical service components, and a ground bridge for communication companies to correctly ground their equipment.

    Permit
    19-35764-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $1,910
    Fees
    $100
    Contractor
    WILLIAM Floyd Schell III
    Days from application to issue
    4
    Expires
    May 11, 2020
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  3. Permit Renovation (Non-Structural) Other

    Replace 8 windows that are old, worn and energy inefficient. Note: Property changed ownership on 1/4/16. Alyssa Silverman and Anthony Holoska are the new owners.

    Permit
    16-08688-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $900
    Fees
    $65

    See this permit on One Stop

  4. Code enforcement Case ENVHADJ-983095SN Closed

    A hearing was held on 04/10/2009 with a result of "Found Guilty". The case was subsequently closed.

    1. Inspection: Inspection Complete
    2. Hearing: Initial Hearing Found Guilty

    The city links this case to permit 19-35764-SERV.

  5. Code enforcement Case ENVHADJ-983546 Closed

    A hearing was held on 04/10/2009 with a result of "Found Guilty". The case was subsequently closed.

    1. Inspection: Inspection Complete
    2. Hearing: Initial Hearing Found Guilty

    The city links this case to permit 19-35764-SERV.

  6. Permit General Mechanical Inspection - Completed

    C MUNGAL WH/TEST CK#1262

    Permit
    08MCH-16988
    Type
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $50
    Contractor
    Semper-Fi Gas & Plumbing
  7. Permit General Mechanical Inspection - Completed

    reconnect #4854

    Permit
    08MCH-01524
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    River City A/C Inc.
    Days from application to issue
    5
  8. Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved

    RECONNECT

    Permit
    06ELC-14465
    Type
    Electrical Repair / Replacement / Addition
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Brown Electric
    Days from application to issue
    10
  9. Permit Residential APPROVAL

    Katrina Repairs

    Permit
    ACCELA-34170
    Type
    Residential
    Work
    Repair
    Estimated cost (applicant’s figure)
    $50,000
  10. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    rewire

    Permit
    06ELC-02839
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $102
    Contractor
    Brown Electric
    Days from application to issue
    10
  11. Permit Electrical

    GENERAL REPAIRS SINGLE-FAMILY DWELLING EDGAR BROWN

    Permit
    E03002066
    Type
    Electrical
    Days from application to issue
    0
  12. Permit Mechanical

    INSTALL MECHANICAL EQUIPMENT DOUBLE RESIDENCE OUT OVER 6 MONTHS CARBO 465-9887 125,000 BTUS

    Permit
    M02006768
    Type
    Mechanical
    Days from application to issue
    3