Gentilly Terrace
3610 Clematis Street is in Gentilly Terrace, zoned HU-RD1 (Older neighborhoods, two-family homes on smaller lots). The city has 7 permits on record here; the most recent, a mechanical HVAC permit, was filed in September 2026. 5 are still open. On this block in the past year: 23 requests to 311 and 30 calls to police.
- Zoning
- HU-RD1
- Historic district
- None
- National Register
- Edgewood Park Historic District
- Council district
- D
- Ward
- 8
- Lot size
- 3,801 sq ft
- Parcel
- 41075602
Everything on record here
7 records, newest first · 5 open
-
Permit Mechanical HVAC Permit Issued
Replace 4 ton condenser
- Permit
- 26-27079-HVAC
- Type
- Mechanical HVAC
- Work
- Mechanical HVAC
- Estimated cost (applicant’s figure)
- $8,438
- Fees
- $73
- Contractor
- Keefe John Ditta
- Days from application to issue
- 2
- Expires
- Mar 17, 2027
- Air Conditioning Paid
- Mechanical Paid
- Warm Air Furnaces Paid
- Duct Leakage
- Warm Air Furnace
- Whole House Infiltration
- Rough Mech HVAC Res
- Air Conditioning
- Application Submitted Complete
- Application Review Complete
- Permit Approved Complete
- Mechanical Permit Review Complete
- Application submitted
- Application review
- Permit approved
- Permit Issued Complete
- Issue date
-
Permit Electrical Repair / Replacement / Addition Permit Issued
Exterior Siding Repair, with service Disconnect and Reconnect of the existing service. Upgrade Service will temporarily be pulled from the wall for siding repair.
- Permit
- 21-16796-ERPR
- Type
- Electrical Repair / Replacement / Addition
- Work
- Electrical Repair / Replacement / Addition
- Estimated cost (applicant’s figure)
- $750
- Fees
- $100
- Contractor
- Joshua Robert Scalf
- Days from application to issue
- 28
- Expires
- Jan 8, 2022
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit Renovation (Non-Structural) Permit Issued
Repairing and replacing siding on home exterior. Temporary disconnect and reconnect electrical to complete this project, NO OTHER WORK TO BE DONE.
- Permit
- 21-03287-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $1,750
- Fees
- $70
- Contractor
- Brian T Ayres
- Days from application to issue
- 68
- Expires
- Nov 11, 2021
- Application submitted
- Application review
- Zoning review
- Plan review
- Permit approved
- Issue date
-
Permit Mechanical Fuel Gas Permit Finaled
Danny Griffin-866-2730-pd chK# 13710-Line, Meter No release till home finished, and dryer vent exhausted
- Permit
- 16-19362-FGAS
- Type
- Mechanical Fuel Gas
- Work
- Mechanical Fuel Gas
- Estimated cost (applicant’s figure)
- $0
- Fees
- $45
- Contractor
- Danny Griffin
- Days from application to issue
- 0
- Expires
- Dec 10, 2016
-
Permit Electrical Repair / Replacement / Addition Permit Issuance - Active
VACANCY
- Permit
- 10ELC-07034
- Type
- Electrical Repair / Replacement / Addition
- Work
- Repair-Replacement-Addition
- Estimated cost (applicant’s figure)
- $0
- Fees
- $40
- Contractor
- Cleveland A Francois Jr.
- Days from application to issue
- 0
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE
- Permit
- 07ELC-09813
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $77
- Contractor
- Herman L. Mcclain Jr.
- Days from application to issue
- 10
-
Permit Emergency Permit Certificate of Occupancy - Issued w/Meter
KATRINA DAMAGE REPAIR
- Permit
- 07BLD-00627
- Type
- Emergency Permit
- Work
- Emergency Permit
- Estimated cost (applicant’s figure)
- $40,000
- Fees
- $250
- Days from application to issue
- 5