Gentilly Terrace

3628 Clematis Street is in Gentilly Terrace, zoned HU-RD1 (Older neighborhoods, two-family homes on smaller lots). The city has 6 permits on record here; the most recent, a residential permit, was filed in December 2011. 6 are still open. On this block in the past year: 23 requests to 311 and 30 calls to police.

Zoning
HU-RD1
Historic district
None
National Register
Edgewood Park Historic District
Council district
D
Ward
8
Lot size
3,038 sq ft
Parcel
41075614

Everything on record here

6 records, newest first · 6 open

  1. Permit Residential Permit Issuance Active

    Demolish double family house to grade. Contractor shall remove and dispose of all debris within 72 hours of completion. Proof of disposal required at time of final inspection. Separate permit required from sewerage and water board to cap sewer lines and

    Permit
    11BLD-08540
    Type
    Residential
    Work
    Demolition
    Estimated cost (applicant’s figure)
    $12,056
    Fees
    $160

    Placed here by its map location from “3630 CLEMATIS ST”.

  2. Permit General Mechanical Application Acceptance - Approved

    INSTALL GAS W\H, AND GAS RECONNECT. PERRY DICKENS (#1106)

    Permit
    08MCH-08985
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $92
    Contractor
    Perry's Ac & Heating LLC
    Days from application to issue
    5
  3. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    07ELC-25534
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $60
    Contractor
    Landix Elect.
    Days from application to issue
    10
  4. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    07ELC-25535
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $54
    Contractor
    Landix Elect.
    Days from application to issue
    10
  5. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    rewire

    Permit
    07ELC-18572
    Type
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $90
    Contractor
    Thanh's Elec.
  6. Permit Residential APPROVAL

    Katrina Repairs

    Permit
    ACCELA-81047
    Type
    Residential
    Work
    Repair
    Estimated cost (applicant’s figure)
    $27,000