Gentilly Terrace
3533 Clermont Drive is in Gentilly Terrace, zoned HU-RD1 (Older neighborhoods, two-family homes on smaller lots). The city has 14 permits on record here; the most recent, an electrical service / circuit / feeder permit, was filed in October 2016. 7 are still open. On this block in the past year: 11 requests to 311 and 2 calls to police.
- Zoning
- HU-RD1
- Historic district
- None
- National Register
- Edgewood Park Historic District
- Council district
- D
- Ward
- 8
- Lot size
- 5,083 sq ft
- Parcel
- 41075689
Everything on record here
14 records, newest first · 7 open
-
Permit Electrical Service / Circuit / Feeder Permit Finaled
COMPLETE WIRE STARTED BY OTHERS 16-21073-RNVS
- Permit
- 16-35768-SERV
- Type
- Electrical Service / Circuit / Feeder
- Work
- Electrical Service / Circuit / Feeder
- Estimated cost (applicant’s figure)
- $0
- Fees
- $106
- Contractor
- Dannye B Jones
- Days from application to issue
- 0
- Expires
- Apr 27, 2017
-
Permit Mechanical Fuel Gas Permit Finaled
gas vacancy,installed h.w heater
- Permit
- 16-34657-FGAS
- Type
- Mechanical Fuel Gas
- Work
- Mechanical Fuel Gas
- Estimated cost (applicant’s figure)
- $1,200
- Fees
- $45
- Days from application to issue
- 5
- Expires
- Apr 24, 2017
-
Permit Mechanical HVAC Permit Finaled
install condensing unit.
- Permit
- 16-32903-HVAC
- Type
- Mechanical HVAC
- Work
- Mechanical HVAC
- Estimated cost (applicant’s figure)
- $2,300
- Fees
- $45
- Contractor
- Sustainable Energy Solutions LLC
- Days from application to issue
- 1
- Expires
- Apr 5, 2017
-
Permit Electrical Service / Circuit / Feeder Permit Cancelled
Rewire
- Permit
- 16-25941-SERV
- Type
- Electrical Service / Circuit / Feeder
- Work
- Electrical Service / Circuit / Feeder
- Estimated cost (applicant’s figure)
- $2,000
- Fees
- $133
- Contractor
- Elbred R Malone Jr
- Days from application to issue
- 0
-
Permit Renovation (Structural) Occupancy
Supplement to increase the cost and scope of work started under #16-18344-RNVS. Remove and replace floor joist and interior walls as per sketch.
- Permit
- 16-21073-RNVS
- Type
- Renovation (Structural)
- Work
- Renovation (Structural)
- Estimated cost (applicant’s figure)
- $2,500
- Fees
- $75
- Contractor
- Rytam Construction Services
- Days from application to issue
- 0
- Expires
- Dec 27, 2016
-
Permit Construction Loop Permit Finaled
construction loop
- Permit
- 16-19426-LOOP
- Type
- Construction Loop
- Work
- Construction Loop
- Estimated cost (applicant’s figure)
- $3,500
- Fees
- $40
- Days from application to issue
- 6
- Expires
- Dec 17, 2016
-
Permit Renovation (Non-Structural) Other
Interior renovation per attached sketch. Includes electrical, mechanical and plumbing.No change in foot print. No increase in square footage.
- Permit
- 16-18344-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $25,000
- Fees
- $185
- Contractor
- Christopher E Johnson, Rytam Construction Services
- Days from application to issue
- 5
- Expires
- Dec 7, 2016
-
Permit General Mechanical Inspection Phase
Work Descripton: rll-d-lambert-415-6853-reconnect-ck-35524 Historical Import Type: Permits Mechanical Residential General Mechanical User: RLARRIEU Tracking: 186199437962 Status: Meter Released Status Date: 1/6/2012 12:00:00 AM Owner: Griffin Clarence Owner Address: 3533 Clermont Drive, New Orleans, LA 70122 Owner Edited By: 12/29/2011 by RLARRIEU
- Permit
- 11MCH-10511
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $30
- Contractor
- Accardo/Lambert/Plmb
- Expires
- Jul 3, 2012
-
Permit Electrical Permit Issuance Active
VACANCY
- Permit
- 11ELC-13924
- Type
- Electrical
- Work
- Repair-Replacement-Addition
- Estimated cost (applicant’s figure)
- $0
- Fees
- $40
-
Permit General Mechanical Application Acceptance - Approved
*DEAN WALTERS FURNACE A/C CK31232
- Permit
- 08MCH-10132
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $67
- Contractor
- Complete Residential Service LLC
- Days from application to issue
- 5
-
Permit General Mechanical Application Acceptance - Approved
RLL-D-LAMBERT-415-6853-RECONNECT-1-WH-CK-30277
- Permit
- 08MCH-03092
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $50
- Contractor
- Accardo/Lambert/Plmb
- Days from application to issue
- 5
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE
- Permit
- 07ELC-22386
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $104
- Contractor
- Malone Electrical
- Days from application to issue
- 10
-
Permit Residential Permit Issuance Active
HURRICANE DAMAGE REPAIRS TO INCLUDE: FLOORS, SHEETROCK, ROOF, PLUMBING, ELECTRICAL AND OTHER REPAIRS AS NEEDED TO MAKE THE HOME LIVEABLE.
- Permit
- 07BLD-07078
- Type
- Residential
- Work
- Emergency Permit
- Estimated cost (applicant’s figure)
- $25,000
-
Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved
RECONNECT
- Permit
- 06ELC-40763
- Type
- Electrical Repair / Replacement / Addition
- Work
- Repair-Replacement-Addition
- Estimated cost (applicant’s figure)
- $0
- Fees
- $30
- Contractor
- Malone Electrical
- Days from application to issue
- 10