Gentilly Terrace

3614 Clermont Drive is in Gentilly Terrace, zoned HU-RD1 (Older neighborhoods, two-family homes on smaller lots). The city has 9 permits on record here; the most recent, a solar permit, was filed in July 2013. 7 are still open. On this block in the past year: 12 requests to 311 and 4 calls to police.

Zoning
HU-RD1
Historic district
None
National Register
Edgewood Park Historic District
Council district
D
Ward
8
Lot size
4,828 sq ft
Parcel
41075694

Everything on record here

9 records, newest first · 7 open

  1. Permit Solar Permit Issued

    SOLAR PANELS- 13-28825

    Permit
    13-29139-SOLR
    Type
    Solar
    Work
    Solar
    Estimated cost (applicant’s figure)
    $0
    Fees
    $72
    Contractor
    Joe L. Bridges Jr.
    Days from application to issue
    0
    Expires
    Jan 1, 2014

    See this permit on One Stop

  2. Permit Renovation (Non-Structural) Occupancy

    Install solar panels.

    Permit
    13-28825-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $6,000
    Fees
    $90
    Contractor
    JBS Contractors Co
    Days from application to issue
    0
    Expires
    Dec 27, 2013

    See this permit on One Stop

  3. Permit General Mechanical Application Acceptance - Approved

    INSTALL GAS LINE AND GAS W\H. CARTER RADER (#35198)

    Permit
    08MCH-15879
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $35
    Contractor
    Carter & Sons P & H
    Days from application to issue
    5
  4. Permit Emergency Permit Application Acceptance - Approved No Review

    Complete Interior Renovations work to include: Drywall,Interior Finishes,Flooring,Cabinets,Electrical,Hvac and Plumbing.

    Permit
    08BLD-05325
    Type
    Emergency Permit
    Work
    Emergency Permit
    Estimated cost (applicant’s figure)
    $0
    Fees
    $275
    Days from application to issue
    5
  5. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    08ELC-07637
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $75
    Contractor
    Dan Peters Electric
    Days from application to issue
    10
  6. Permit Residential APPROVAL

    Katrina Repairs

    Permit
    ACCELA-46484
    Type
    Residential
    Work
    Repair
    Estimated cost (applicant’s figure)
    $40,000
  7. Permit Mechanical

    INSTALL MECHANICAL EQUIPMENT SINGLE-FAMILY DWELLING INSTALLATION NEW GAS LINE AND ONE GAS WATERHEATER. 150,000 BTU. PETE 288-5867.

    Permit
    M04000067
    Type
    Mechanical
    Days from application to issue
    0
  8. Permit Mechanical

    INSTALL MECHANICAL EQUIPMENT SINGLE-FAMILY DWELLING REPLACE GAS WATER HEATER. STEVE CHAMBERS - 469-4642

    Permit
    M02007919
    Type
    Mechanical
    Days from application to issue
    4
  9. Permit Building

    GENERAL REPAIRS SINGLE-FAMILY DWELLING REPAIR EXISTING GARAGE. NO WORK BEING DONE TO MAIN STRUCTURE.

    Permit
    B02001257
    Type
    Building
    Days from application to issue
    0