Gentilly Terrace

3709 Clermont Drive is in Gentilly Terrace, zoned HU-RD1 (Older neighborhoods, two-family homes on smaller lots). The city has 5 permits on record here; the most recent, a residential re-roofing permit, was filed in October 2025. 4 are still open. On this block in the past year: 3 requests to 311 and 6 calls to police.

Zoning
HU-RD1
Historic district
None
National Register
Edgewood Park Historic District
Council district
D
Ward
8
Lot size
4,874 sq ft
Parcel
41075710

Everything on record here

5 records, newest first · 4 open

  1. Permit Residential Re-Roofing Other

    Residential Re-Roof ONLY. New Architectural Shingle Roof: standard architectural on house roof only. - Remove existing shingles & felt down to the wood deck for inspection - Replace all rotted/defective decking as needed. - Install Ice & Water self adhering leak barrier in valleys & all leak vulnerable areas - Install Synthetic Felt underlayment on entire deck overlapping the leak barrier - Install True Starter course & shingles according to mfg's specifications with 6 nails per shingle - Install Ridge & Hip Shingles - Install Drip Edge on perimeter - Install all new Plumbing Boots - Install 2 turbine Vents - Install Low slope roofing on back section Warranty: - Limited Lifetime Mfg's Shingle Warranty - Sumbelt 5 yr. Labor/Workmanship

    Permit
    25-30249-ROOF
    Type
    Residential Re-Roofing
    Work
    Residential Re-Roofing
    Estimated cost (applicant’s figure)
    $0
    Fees
    $60
    Contractor
    Sunbelt Roofs, LLC.
    Days from application to issue
    0
    Expires
    Apr 9, 2026
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date

    See this permit on One Stop

  2. Permit Mechanical

    3-TON CONDENSER, DEAN WALTERS (#R100488613060)

    Permit
    07MCH-07731
    Type
    Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $42
  3. Permit General Mechanical Application Acceptance - Approved

    NEW GAS W/H AND OUT OVER SIX MONTHS. JAMAL EVERY (#2290)

    Permit
    07MCH-07681
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $50
    Contractor
    Jae's Plbg & Repairs
    Days from application to issue
    5
  4. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    07ELC-08577
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $68
    Contractor
    T.Harris Elec. LLC.
    Days from application to issue
    10
  5. Permit Emergency Permit Application Acceptance - Approved No Review

    HURRICANE DAMAGE REPAIR

    Permit
    06BLD-11351
    Type
    Emergency Permit
    Work
    Emergency Permit
    Estimated cost (applicant’s figure)
    $59,700
    Fees
    $350
    Days from application to issue
    5