Gentilly Terrace
4008 Fairmont Drive is in Gentilly Terrace, zoned HU-RS (Older neighborhoods, single-family homes). The city has 8 permits on record here; the most recent, a mechanical fuel gas permit, was filed in January 2022. 4 are still open. On this block in the past year: 19 requests to 311 and 5 calls to police.
- Zoning
- HU-RS
- Historic district
- None
- Council district
- D
- Ward
- 8
- Lot size
- 6,586 sq ft
- Parcel
- 41076199
Everything on record here
8 records, newest first · 4 open
-
Permit Mechanical Fuel Gas Permit Finaled
gas out over 6 months
- Permit
- 22-02494-FGAS
- Type
- Mechanical Fuel Gas
- Work
- Mechanical Fuel Gas
- Estimated cost (applicant’s figure)
- $400
- Fees
- $30
- Contractor
- ACADIANA PLUMBING & DRAIN L.L.C.
- Days from application to issue
- 1
- Expires
- Jul 27, 2022
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit Renovation (Non-Structural) Permit Issued
This permit is being pulled in case there are openings cut in the interior plaster walls of the home to fish wire during the re-wiring of 4008 Fairmont Drive. These openings will be non-structural and will not in any way effect the structure of the home. (HVAC and electrical repairs). No plumbing. No demolition of any walls.
- Permit
- 21-21916-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $10,842
- Fees
- $115
- Contractor
- GREGORY COOPER THOMPSON, Trusty Air Conditioning and Heating
- Days from application to issue
- 26
- Expires
- Feb 25, 2022
- Application submitted
- Application review
- Zoning review
- Permit approved
- Issue date
- First inspection
-
Permit Mechanical HVAC Permit Finaled
Installation of 4 ton 16 SEER Air Conditioner, 5 ton 16 SEER Evaporator coil and 80K BTU 80% efficient 2 stage ECM gas furnace with new thermostat, drain pan, safety switches, and drain. Condenser is located on left-hand side of home, furnace in attic.
- Permit
- 21-21979-HVAC
- Type
- Mechanical HVAC
- Work
- Mechanical HVAC
- Estimated cost (applicant’s figure)
- $7,247
- Fees
- $73
- Contractor
- Phillip Honadle
- Days from application to issue
- 130
- Expires
- Jun 6, 2022
- Application submitted
- First inspection
- Application review
- Permit approved
- Issue date
-
Permit Electrical Service / Circuit / Feeder Permit Cancelled
This permit is to add 25 new circuits to the residence at 4008 Fairmont Drive
- Permit
- 21-20307-SERV
- Type
- Electrical Service / Circuit / Feeder
- Work
- Electrical Service / Circuit / Feeder
- Estimated cost (applicant’s figure)
- $7,000
- Fees
- $175
- Contractor
- GREGORY COOPER THOMPSON
- Application submitted
- Application review
-
Permit Electrical Service / Circuit / Feeder Permit Finaled
This permit is to upgrade the service at 4008 Fairmont, New Orleans, LA 70448 from a 100 amp service to a 200 amp service.
- Permit
- 21-16790-SERV
- Type
- Electrical Service / Circuit / Feeder
- Work
- Electrical Service / Circuit / Feeder
- Estimated cost (applicant’s figure)
- $1,400
- Fees
- $365
- Contractor
- GREGORY COOPER THOMPSON
- Days from application to issue
- 11
- Expires
- Dec 21, 2021
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit Construction Loop Application Acceptance - Approved
TEMP POLE FEMA TRAILER
- Permit
- 06ELC-12518
- Type
- Construction Loop
- Work
- Construction Loop
- Estimated cost (applicant’s figure)
- $0
- Fees
- $30
- Contractor
- Bradley Electric Service
- Days from application to issue
- 10
-
Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved
Reconnect
- Permit
- 06ELC-00874
- Type
- Electrical Repair / Replacement / Addition
- Work
- Repair-Replacement-Addition
- Estimated cost (applicant’s figure)
- $0
- Fees
- $30
- Contractor
- Malone Electrical
- Days from application to issue
- 10
Placed here by its map location from “4015 Fairmont St”.
-
Permit General Mechanical Inspection - Completed
re-connect david #1015
- Permit
- 05MCH-06609
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $50
- Contractor
- Natl Economy Plbg Co
- Days from application to issue
- 5