St. Roch
3003 Spain Street is in St. Roch, zoned HU-RD1 (Older neighborhoods, two-family homes on smaller lots). The city has 4 permits on record here; the most recent, a demolition permit, was filed in January 2007. 4 are still open. A demolition permit was filed in January 2007. There was 1 past code enforcement case, the latest in April 2009, all closed. On this block in the past year: 4 requests to 311 and 7 calls to police.
- Zoning
- HU-RD1
- Historic district
- None
- Council district
- D
- Ward
- 8
- Lot size
- 5,337 sq ft
- Parcel
- 41078568
Everything on record here
5 records, newest first · 4 open
-
Code enforcement Case ENVHADJ-9891 Closed
A hearing was held on 04/10/2009 with a result of "Found Guilty". The case was subsequently closed.
- Inspection: Inspection Complete
- Hearing: Initial Hearing Found Guilty
The city links this case to permit 07BLD-00324.
-
Permit Demolition Application Acceptance - Approved No Review
DEMOLITION AND REMOVAL OF ALL DEBRIS
- Permit
- 07BLD-00324
- Type
- Demolition
- Work
- Demolition
- Estimated cost (applicant’s figure)
- $9,495
- Fees
- $125
- Days from application to issue
- 5
-
Permit Demolition Inspection - Completed No Requirements
Demolition of hurricane damaged single residential unit. Contractor to remove and dispose of all debris within 72 hours and to have a final inspection of the site. A licensed plumber must secure a separate permit from the Sewage and Water Board to cap off sewer lines and remove water meters prior to demolition.
- Permit
- 07BLD-00188
- Type
- Demolition
- Work
- Demolition
- Estimated cost (applicant’s figure)
- $9,495
- Fees
- $125
- Days from application to issue
- 5
-
Permit Electrical Application Approved
vacant repair
- Permit
- 04ELC-01828
- Type
- Electrical
- Work
- Repair-Replacement-Addition
- Estimated cost (applicant’s figure)
- $0
- Fees
- $30
-
Permit General Mechanical Inspection - Completed
INSTALL ELEC WAF,GAS W\H,OUT OVER 6 MOS & 3-TON A\C SINNOTT
- Permit
- 04MCH-01493
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $112
- Contractor
- Prof.Inst.& Repairs
- Days from application to issue
- 5