Gentilly Terrace

4915 Franklin Avenue is in Gentilly Terrace, zoned S-RS (Newer neighborhoods, single-family homes). The city has 12 permits on record here; the most recent, a permanent generator permit, was filed in July 2020. 5 are still open. On this block in the past year: 3 requests to 311 and 16 calls to police.

Zoning
S-RS
Historic district
None
Council district
D
Ward
8
Lot size
9,749 sq ft
Parcel
41087313

Everything on record here

12 records, newest first · 5 open

  1. Permit Permanent Generator Other

    Client is under contract with GalCan provide and install a 20KW Briggs & Stratton generator.

    Permit
    20-34693-EGEN
    Type
    Permanent Generator
    Work
    Permanent Generator
    Estimated cost (applicant’s figure)
    $20,000
    Fees
    $103
    Contractor
    Allan Bernard Jones
    1. Application submitted

    See this permit on One Stop

  2. Permit Renovation (Non-Structural) Other

    Generator Installation

    Permit
    20-34791-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $20,000
    Fees
    $160
    1. Application submitted

    See this permit on One Stop

  3. Permit Solar Permit Finaled

    Solar - check meter.

    Permit
    20-25743-SOLR
    Type
    Solar
    Work
    Solar
    Estimated cost (applicant’s figure)
    $8,000
    Fees
    $55
    Contractor
    Michael Anthony King
    Days from application to issue
    40
    Expires
    Nov 29, 2020

    See this permit on One Stop

  4. Permit Renovation (Non-Structural) Other

    Install 7.25 kW grid-tie solar pv system - redeploy system.

    Permit
    20-24129-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $18,000
    Fees
    $150
    Contractor
    POSIGEN OF LOUISIANA LLC
    Days from application to issue
    18
    Expires
    Oct 19, 2020
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date
    7. First inspection

    See this permit on One Stop

  5. Permit Mechanical Fuel Gas Permit Finaled

    Manny Mittne-985-290-9172-pd hck# 1657-Mete,r Wh

    Permit
    17-15700-FGAS
    Type
    Mechanical Fuel Gas
    Work
    Mechanical Fuel Gas
    Estimated cost (applicant’s figure)
    $0
    Fees
    $50
    Contractor
    Manuel L. Mitten
    Days from application to issue
    0
    Expires
    Nov 5, 2017

    See this permit on One Stop

  6. Permit Mechanical Fuel Gas In Review

    gas water heater

    Permit
    17-15102-FGAS
    Type
    Mechanical Fuel Gas
    Work
    Mechanical Fuel Gas
    Estimated cost (applicant’s figure)
    $600
    Fees
    $0
    Contractor
    RAMM Construction Group LLC

    See this permit on One Stop

  7. Permit Mechanical Fuel Gas Permit Issued

    Gas has been off. inspect gas line and pressure line for inspection

    Permit
    16-37362-FGAS
    Type
    Mechanical Fuel Gas
    Work
    Mechanical Fuel Gas
    Estimated cost (applicant’s figure)
    $400
    Fees
    $140
    Days from application to issue
    4
    Expires
    May 14, 2017

    See this permit on One Stop

  8. Permit Mechanical HVAC Permit Issued

    remove 4 ton gas system and replace with new system. Add 2.5 ton system upstairs run all duct and line sets

    Permit
    16-37361-HVAC
    Type
    Mechanical HVAC
    Work
    Mechanical HVAC
    Estimated cost (applicant’s figure)
    $11,000
    Fees
    $113
    Days from application to issue
    4
    Expires
    May 14, 2017

    See this permit on One Stop

  9. Permit Construction Loop Permit Finaled

    Set temp pole

    Permit
    16-35324-LOOP
    Type
    Construction Loop
    Work
    Construction Loop
    Estimated cost (applicant’s figure)
    $240
    Fees
    $40
    Days from application to issue
    20
    Expires
    May 14, 2017

    See this permit on One Stop

  10. Permit Electrical Service / Circuit / Feeder Meter Release

    Change service and wire upstairs of house. Device is existing 200 amp service. Changing to a 200 amp service

    Permit
    16-28358-SERV
    Type
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $5,500
    Fees
    $118
    Days from application to issue
    1
  11. Permit Renovation (Structural) Permit Issued

    Repairs to single family residence. Repairs include windows, doors, painting, flooring, molding, sheet rock, electrical, plumbing, mechanical, cabinets, counter tops, new roof, remove concrete rear existing concrete to use for green space, and studs. No demolition of any walls.

    Permit
    16-27465-RNVS
    Type
    Renovation (Structural)
    Work
    Renovation (Structural)
    Estimated cost (applicant’s figure)
    $63,000
    Fees
    $375
    Contractor
    Lopez Floors Inc
    Days from application to issue
    0
    Expires
    Feb 22, 2017

    See this permit on One Stop

  12. Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved

    reconnect

    Permit
    06ELC-31354
    Type
    Electrical Repair / Replacement / Addition
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    E-1 Electric
    Days from application to issue
    10