Gentilly Terrace
4924 Marigny Street is in Gentilly Terrace, zoned S-RS (Newer neighborhoods, single-family homes). The city has 9 permits on record here; the most recent, a general mechanical permit, was filed in September 2013. 6 are still open. A demolition permit was filed in March 2007. On this block in the past year: 14 requests to 311 and 9 calls to police.
- Zoning
- S-RS
- Historic district
- None
- Council district
- D
- Ward
- 8
- Lot size
- 6,007 sq ft
- Parcel
- 41087491
Everything on record here
9 records, newest first · 6 open
-
Permit General Mechanical Permit Finaled
install 2-warm air furnace and 2-condenser. gregory mckendall (#10946) 13-36202-RNVN
- Permit
- 13-37739-MECH
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $170
- Contractor
- Gregory J. McKendall Sr.
- Days from application to issue
- 0
- Expires
- Mar 13, 2014
-
Permit Electrical Service / Circuit / Feeder Permit Finaled
RENOVATIONS- 13-36202
- Permit
- 13-36360-SERV
- Type
- Electrical Service / Circuit / Feeder
- Work
- Electrical Service / Circuit / Feeder
- Estimated cost (applicant’s figure)
- $0
- Fees
- $154
- Contractor
- Bryant Michael Deruise
- Days from application to issue
- 0
- Expires
- Feb 28, 2014
-
Permit Renovation (Non-Structural) Permit Finaled
Supplement to 08BLD-05571 to complete repairs - final electrical, final plumbing, final mechanical.
- Permit
- 13-36202-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $1,000
- Fees
- $65
- Days from application to issue
- 0
- Expires
- Feb 28, 2014
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
NEW CONSTRUCTION & LOW VOLTAGE- 08BLD-05571
- Permit
- 11ELC-03146
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $169
- Contractor
- , Breeze Company
- Days from application to issue
- 0
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE- 08BLD-05571
- Permit
- 09ELC-18505
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $135
- Contractor
- J Moreno Electric LLC
- Days from application to issue
- 10
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE- 08BLD-05571
- Permit
- 09ELC-18448
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $135
- Contractor
- J Moreno Electric LLC
- Days from application to issue
- 10
-
Permit Construction Loop Application Acceptance - Approved
TEMP POLE
- Permit
- 09ELC-11418
- Type
- Construction Loop
- Work
- Construction Loop
- Estimated cost (applicant’s figure)
- $0
- Fees
- $30
- Contractor
- J Moreno Electric LLC
- Days from application to issue
- 10
-
Permit New Construction Plan Review - Completed
Construct a 3847 sq ft 3-story single-family house as per plans.
- Permit
- 08BLD-05571
- Type
- New Construction
- Work
- New
- Estimated cost (applicant’s figure)
- $150,000
- Fees
- $950
- Contractor
- Gene Brian Engineering
- Days from application to issue
- 56
-
Permit Demolition Inspection - Completed No Requirements
Demolition of hurricane damaged single residential unit. Contractor to remove and dispose of all debris within 72 hours and to have a final inspection of the site. A licensed plumber must secure a separate permit from the Sewage and Water Board to cap off sewer lines and remove water meters prior to demolition.
- Permit
- 07BLD-02500
- Type
- Demolition
- Work
- Demolition
- Estimated cost (applicant’s figure)
- $15,360
- Fees
- $155
- Days from application to issue
- 5