Gentilly Terrace
4917 Painters Street is in Gentilly Terrace, zoned S-RS (Newer neighborhoods, single-family homes). The city has 7 permits on record here; the most recent, a general mechanical permit, was filed in November 2007. 7 are still open. On this block in the past year: 4 requests to 311 and 7 calls to police.
- Zoning
- S-RS
- Historic district
- None
- Council district
- D
- Ward
- 8
- Lot size
- 5,956 sq ft
- Parcel
- 41087724
Everything on record here
7 records, newest first · 7 open
-
Permit General Mechanical Application Acceptance - Approved
INSTALL NEW CONDENSER UNITS. KEITH MARKS (#7792 \ 7867)
- Permit
- 07MCH-17748
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $42
- Contractor
- Trademasters Inc.
- Days from application to issue
- 5
-
Permit Mechanical Permit Issuance Active
NEW CONDENSER UNITS. (#7792 \ 7867)
- Permit
- 07MCH-17749
- Type
- Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $42
-
Permit General Mechanical Meter Release - Released
ajm, gas w. heater, 100 ft of line , ck#1416
- Permit
- 07MCH-16569
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $35
- Contractor
- Pat Waguespack Jr Plbg.
- Days from application to issue
- 5
-
Permit General Mechanical Meter Release - Released
ajm, gas w. heat, 100 ft. of line, Ck# 1416
- Permit
- 07MCH-16570
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $35
- Contractor
- Pat Waguespack Jr Plbg.
- Days from application to issue
- 5
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE
- Permit
- 07ELC-16445
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $86
- Contractor
- E-1 Electric
- Days from application to issue
- 10
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE
- Permit
- 07ELC-16446
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $86
- Contractor
- E-1 Electric
- Days from application to issue
- 10
-
Permit Residential APPROVAL
Remove and replace water damaged drywall, inspect electrical, mechanical and plumbing systems and repair/replace where necessary. Alteration and Kitchen Renovations, Replace Cabinets, Fixtures, Flooring, Sheetrocking, Painting, Electrical and Plumbing.
- Permit
- ACCELA-2182
- Type
- Residential
- Work
- Repair
- Estimated cost (applicant’s figure)
- $50,000