Little Woods
7635 Benson Street is in Little Woods, zoned S-RS (Newer neighborhoods, single-family homes). The city has 6 permits on record here; the most recent, a street cut permit, was filed in October 2024. 5 are still open. On this block in the past year: 4 requests to 311 and 0 calls to police.
- Zoning
- S-RS
- Historic district
- None
- Council district
- E
- Ward
- 9
- Lot size
- 5,312 sq ft
- Parcel
- 41089365
Everything on record here
6 records, newest first · 5 open
-
Permit Street Cut Permit Issued
Place (1) 2” conduit and cable by directional bore between (1) 3’x 5’ cut and (1) 2’x2’ cut:
- Permit
- 24-31634-RSTC
- Type
- Street Cut
- Work
- Street Cut
- Estimated cost (applicant’s figure)
- $0
- Fees
- $88
- Days from application to issue
- 19
- Expires
- May 4, 2025
-
Permit General Mechanical Inspection - Expired
INSTALL GAS WAF AND A\C. ROY HUGHES (#45-544346938)
- Permit
- 10MCH-01257
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $80
- Contractor
- Roy Hughes Refrigeration & Elec. Service
- Days from application to issue
- 5
Placed here by its map location from “7633 Benson St”.
-
Permit General Mechanical Application Acceptance - Approved
INSTALL A\C 3-TON , GAS W\H AND OUT OVER SIX MONTHS. DEAN WALTERS (#818882067)
- Permit
- 08MCH-05186
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $92
- Contractor
- Complete Residential Service LLC
- Days from application to issue
- 5
-
Permit General Mechanical Certificate Of Completion - Issued No Meter
INSTALL 3-CONDENSER, ELEC W\H AND RECONNECT. (#101063716150)
- Permit
- 07MCH-19974
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $92
- Contractor
- Complete Residential Service LLC
- Days from application to issue
- 5
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
Re-wire service change
- Permit
- 07ELC-14792
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $126
- Contractor
- Sean Jackson
- Days from application to issue
- 10
-
Permit Residential APPROVAL
Katrina Repairs
- Permit
- ACCELA-67460
- Type
- Residential
- Work
- Repair
- Estimated cost (applicant’s figure)
- $150,000