Little Woods
9851 Andover Drive is in Little Woods, zoned S-RS (Newer neighborhoods, single-family homes). The city has 7 permits on record here; the most recent, a renovation (non-structural) permit, was filed in January 2025. 6 are still open. There was 1 past code enforcement case, the latest in April 2013, all closed. On this block in the past year: 13 requests to 311 and 8 calls to police.
- Zoning
- S-RS
- Historic district
- None
- Council district
- E
- Ward
- 9
- Lot size
- 7,313 sq ft
- Parcel
- 41090244
Everything on record here
8 records, newest first · 6 open
-
Permit Renovation (Non-Structural) Application Accepted
Add new stucco to old stucco and paint
- Permit
- 25-00406-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $2,500
- Fees
- $135
- Application submitted
-
Code enforcement Case 13-02036-PNBL Closed
The property was inspected on 11/06/2014 with a finding of "No Violation". The file was subsequently closed.
- Inspection: Inspection No Violation
The city links this case to permit 25-00406-RNVN.
-
Permit General Mechanical Permit Finaled
ajm311, meter
- Permit
- 12-21762-MECH
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $30
- Days from application to issue
- 1
- Expires
- Feb 15, 2013
-
Permit General Mechanical Application Acceptance - Approved
RLL-CISCO-329-6411-1-AC-1-WAF-CK-1901
- Permit
- 07MCH-17993
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $73
- Contractor
- Cisco's Htg. & A/C
- Days from application to issue
- 5
-
Permit Electrical Permit Issuance Active
REWIRE
- Permit
- 07ELC-20890
- Type
- Electrical
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $84
-
Permit Mechanical Permit Issuance Active
GAS W/H AND RECONNECT. ALI MESBAH (#7888)
- Permit
- 07MCH-09637
- Type
- Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $50
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REPAIRS
- Permit
- 07ELC-14447
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $75
- Contractor
- Carr's Electric
- Days from application to issue
- 10
-
Permit Residential APPROVAL
Remove and replace water damaged drywall, inspect electrical, mechanical and plumbing systems and repair/replace where necessary. Alteration and Kitchen Renovations, Replace Cabinets, Fixtures, Flooring, Sheetrocking, Painting, Electrical and Plumbing
- Permit
- ACCELA-103742
- Type
- Residential
- Work
- Repair
- Estimated cost (applicant’s figure)
- $25,000