Dillard

4336 Rayne Drive is in Dillard, zoned S-RS (Newer neighborhoods, single-family homes). The city has 6 permits on record here; the most recent, a repair permit, was filed in October 2010. 6 are still open. A demolition permit was filed in September 2010. There was 1 past code enforcement case, the latest in September 2010, all closed. On this block in the past year: 7 requests to 311 and 5 calls to police.

Zoning
S-RS
Historic district
None
Council district
D
Ward
7
Lot size
6,695 sq ft
Parcel
41106097

Everything on record here

7 records, newest first · 6 open

  1. Permit Repair Permit Issuance - Active

    GENERAL REPAIRS TO EXISTING SINGLE - SHEETROCK, TRIM, INTERIOR/EXTERIOR PAINT. PERMIT FOR DEMOLITION ISSUED IN ERROR. THE PERMIT SHOULD HAVE BEEN FOR 4336 RAY AVE.

    Permit
    10BLD-05568
    Type
    Repair
    Work
    Repair
    Estimated cost (applicant’s figure)
    $7,425
    Fees
    $100
    Days from application to issue
    0
  2. Code enforcement Case ENVHADJ-10-03661 Closed

    A hearing was held on 12/15/2010 with a result of "Dismissed". The case was subsequently closed.

    1. Inspection: Inspection Adjudication Fast Track
    2. Hearing: Initial Hearing Dismissed

    The city links this case to permit 10BLD-05568.

  3. Permit Demolition Application Acceptance - Approved No Review

    demolish single family to grade. contractor shall remove and dispose of all debris within 72 hours of completion. proof of disposal required at time of final inspection. separate permit required from sewerage and water board to cap sewer lines and remove water meters.imminent danger per johnny odom

    Permit
    10BLD-04756
    Type
    Demolition
    Work
    Demolition
    Estimated cost (applicant’s figure)
    $1,258
    Fees
    $105
    Days from application to issue
    5
  4. Permit General Mechanical Meter Release - Released

    out over 6 months; john ; ck#1810;

    Permit
    07MCH-20087
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Kelley's Plbg Ser
    Days from application to issue
    5
  5. Permit General Mechanical Application Acceptance - Approved

    J HILL AC COND. CK#2217

    Permit
    07MCH-12539
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $42
    Contractor
    Air- Max, Inc.
    Days from application to issue
    5
  6. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    07ELC-20530
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $68
    Contractor
    E-1 Electric
    Days from application to issue
    10
  7. Permit Electrical

    INCREASE OF SERVICE SINGLE-FAMILY DWELLING INCREASE REWIRE

    Permit
    E01001593
    Type
    Electrical
    Days from application to issue
    0