Dillard

2024 Sumpter Street is in Dillard, zoned S-RS (Newer neighborhoods, single-family homes). The city has 7 permits on record here; the most recent, an electrical permit, was filed in September 2011. 7 are still open. On this block in the past year: 10 requests to 311 and 3 calls to police.

Zoning
S-RS
Historic district
None
Council district
D
Ward
7
Lot size
4,210 sq ft
Parcel
41106378

Everything on record here

7 records, newest first · 7 open

  1. Permit Electrical Permit Issuance Active

    LOWERING SERVICE- 11BLD-02986

    Permit
    11ELC-09861
    Type
    Electrical
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $40
  2. Permit Renovation (Structural) Certificate of Occupancy - Issued No Meter

    ELEVATE EXISTING SINGLE TO MEET/BE ABOVE THE BFE. TO ELEVATE AN EXISTING STRUCTURE A FOUNDATION PLAN AND OTHER FOUNDATION DETAILS PREPARED AND CERTIFIED BY A LOUISIANA REGISTERED ARCHITECT OR A LOUISIANA REGISTERED CIVIL ENGINEER SHALL BE AVAILABLE AT THE CONSTRUCTION SITE FOR THE FOUNDATION INSPECTION. THE FOUNDATION PLAN MUST SHOW HOW THE STRUCTURE WILL BE ANCHORED TO THE FOUNDATION.

    Permit
    11BLD-02986
    Type
    Renovation (Structural)
    Work
    Renovation (Structural)
    Estimated cost (applicant’s figure)
    $72,140
    Fees
    $425
    Days from application to issue
    0
  3. Permit General Mechanical Inspection - Completed

    *FRANCISCO GONZALES FURNACE A/C MO#

    Permit
    08MCH-18213
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $67
    Contractor
    Cisco's Htg. & A/C
    Days from application to issue
    5
  4. Permit General Mechanical Application Acceptance - Approved

    GAS WAF AND A\C. KEITH THOMAS (#08-995074321)

    Permit
    08MCH-17280
    Type
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $67
    Contractor
    Afj Electrical/Mechanical/Plumbing LLC
  5. Permit General Mechanical Inspection - Completed

    *MANUEL MITTEN W/H METER CK#1152

    Permit
    08MCH-16094
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $50
    Contractor
    Ramm Plumbing LLC
    Days from application to issue
    5
  6. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    07ELC-32366
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $95
    Contractor
    Cameron's Electric
    Days from application to issue
    10
  7. Permit Residential APPROVAL

    Repair Hurricane Damages

    Permit
    ACCELA-47258
    Type
    Residential
    Work
    Repair
    Estimated cost (applicant’s figure)
    $60,000