Gentilly Terrace
4021 Franklin Avenue is in Gentilly Terrace, zoned HU-RD1 (Older neighborhoods, two-family homes on smaller lots). The city has 18 permits on record here; the most recent, a mechanical HVAC permit, was filed in May 2026. 4 are still open. On this block in the past year: 17 requests to 311 and 25 calls to police.
- Zoning
- HU-RD1
- Historic district
- None
- National Register
- Edgewood Park Historic District
- Council district
- D
- Ward
- 8
- Lot size
- 5,061 sq ft
- Parcel
- 41110436
Everything on record here
18 records, newest first · 4 open
-
Permit Mechanical HVAC Other
Install 2-3 ton AC with electric Air Handler.
- Permit
- 26-14245-HVAC
- Type
- Mechanical HVAC
- Work
- Mechanical HVAC
- Estimated cost (applicant’s figure)
- $11,999
- Fees
- $110
- Days from application to issue
- 2
- Expires
- Nov 13, 2026
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit Mechanical HVAC Other
Install 2- 3 ton ac with electric air handlers
- Permit
- 26-14241-HVAC
- Type
- Mechanical HVAC
- Work
- Mechanical HVAC
- Estimated cost (applicant’s figure)
- $12,000
- Fees
- $110
- Days from application to issue
- 2
- Expires
- Nov 13, 2026
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit Electrical Service / Circuit / Feeder Other
Rewire house, install 125 amp 14 circuit breaker panel.
- Permit
- 25-32944-SERV
- Type
- Electrical Service / Circuit / Feeder
- Work
- Electrical Service / Circuit / Feeder
- Estimated cost (applicant’s figure)
- $9,538
- Fees
- $120
- Contractor
- Oscar Lee Carter Jr.
- Days from application to issue
- 9
- Expires
- Apr 30, 2026
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit Electrical Service / Circuit / Feeder Other
Rewire house, install 125 amp 14 circuit breaker panel.
- Permit
- 25-32935-SERV
- Type
- Electrical Service / Circuit / Feeder
- Work
- Electrical Service / Circuit / Feeder
- Estimated cost (applicant’s figure)
- $9,538
- Fees
- $120
- Contractor
- Oscar Lee Carter Jr.
- Days from application to issue
- 9
- Expires
- Apr 30, 2026
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit Street Cut Other
Installation of one 5/8" water meter connection
- Permit
- 25-30016-RSTC
- Type
- Street Cut
- Work
- Street Cut
- Estimated cost (applicant’s figure)
- $0
- Fees
- $313
- Contractor
- Michael Phillips
- Days from application to issue
- 37
- Expires
- May 5, 2026
Placed here by an address range from “4021 Franklin Ave, 4023 Franklin Ave”.
-
Permit Plumbing Permit Other
Install new plumbing system to suite new lay out for two kitchen sinks, two dishwashers, five tubs, five lavatories, two washing machines and two water heaters. The sewer and vents will be PVC and the water lines will be PEX. We will make a new sewer tie in on the City 6" sewer.
- Permit
- 25-14649-PLMB
- Type
- Plumbing Permit
- Work
- Plumbing Permit
- Estimated cost (applicant’s figure)
- $0
- Fees
- $310
- Contractor
- Noel Anthony Irsch Jr
- Days from application to issue
- 98
- Expires
- Feb 19, 2026
-
Permit Mechanical Fuel Gas Other
Install one electric water heater
- Permit
- 25-14645-FGAS
- Type
- Mechanical Fuel Gas
- Work
- Mechanical Fuel Gas
- Estimated cost (applicant’s figure)
- $24,200
- Fees
- $20
- Days from application to issue
- 1
- Expires
- Nov 14, 2025
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit Mechanical Fuel Gas Other
Install one electric water heater
- Permit
- 25-14643-FGAS
- Type
- Mechanical Fuel Gas
- Work
- Mechanical Fuel Gas
- Estimated cost (applicant’s figure)
- $24,200
- Fees
- $20
- Days from application to issue
- 1
- Expires
- Nov 14, 2025
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit Renovation (Non-Structural) Other
Framing Install an estimated 40 linear ft of wood framed interior non-load bearing 2x4 walls and 20 linear feet of 2x6 walls, patch at rotted subfloors. Electrical Wire bathrooms for switches, GFI’s, and light fixtures, provide and install specified new fixtures, repair outlets that are not working, install Electric for HVAC units, install news smoke alarms, and 10 year smoke/carbon monoxide alarms as required. Plumbing - Install new plumbing system to suite new lay out for two kitchen sinks, two dishwashers, five tubs, five lavatories, two washing machines and two water heaters. The sewer and vents will be PVC and the water lines will be PEX. We will make a new sewer tie in on the City 6" sewer. Provide and install fixtures Drywall – Install 25 sheets of drywall at interior walls, Patch where necessary HVAC Install Oxbox central AC systems at each Unit Cabinets/Countertops Provide and install cabinets, granite counter tops, and Pulls Trim Carpentry Install 6 new hallow core doors and trim, install baseboard at Bedroom 2 of 4021 Franklin, install Tile Install floor tile at bathrooms Vanities Install new vanities provided by owner at bathrooms Flooring Clean and seal tile at 4023, provide and install LVT flooring where tile removed at 4021 side Haul Debris Remove Debris from worksite
- Permit
- 25-11021-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $88,075
- Fees
- $594
- Contractor
- Colorsmith LLC
- Days from application to issue
- 21
- Expires
- Oct 30, 2025
- Application submitted
- Application review
- Zoning review
- Plan review
- Permit approved
- Issue date
-
Permit Interior Demolition Other
Remove contents from previous owner, Remove Cabinets and tile floors No use or occupancy. Renovation requires a separate permit. Failure to secure the proper permits or proceed with work outside the scope of this permit will subject the property to additional fees, fines, adjudication and penalties. Call for inspections at (504)-658-7200 or email to request a final inspection with the permit number
- Permit
- 25-03826-DEMI
- Type
- Interior Demolition
- Work
- Interior Demolition
- Estimated cost (applicant’s figure)
- $900
- Fees
- $125
- Contractor
- Colorsmith LLC
- Days from application to issue
- 12
- Expires
- Aug 17, 2025
- Application submitted
- Application review
- Plan review
- Permit approved
- Issue date
-
Permit Electrical Vacancy Permit Cancelled
Vacancy
- Permit
- 25-03240-EVAC
- Type
- Electrical Vacancy
- Work
- Electrical Vacancy
- Estimated cost (applicant’s figure)
- $500
- Fees
- $40
- Contractor
- Oscar L. Carter Jr.
- Application submitted
- Application review
-
Permit Renovation (Non-Structural) Permit Cancelled
File permit as per city of New Orleans to be able to obtain electricity and water.
- Permit
- 22-00834-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $9,000
- Fees
- $105
- Application submitted
- Zoning review
-
Permit Renovation (Non-Structural) Application Accepted
- Permit
- 21-01364-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $0
- Fees
- $60
- Application submitted
-
Permit Renovation (Non-Structural) Other
Inspection for a electrical meter installed.
- Permit
- 20-33365-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $1,400
- Fees
- $70
- Application submitted
-
Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved
VACANCY
- Permit
- 09ELC-16932
- Type
- Electrical Repair / Replacement / Addition
- Work
- Repair-Replacement-Addition
- Estimated cost (applicant’s figure)
- $0
- Fees
- $30
- Contractor
- Rytam Electric Co.
- Days from application to issue
- 10
-
Permit Electrical Permit Issuance Active
REWIRE
- Permit
- 09ELC-01026
- Type
- Electrical
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $68
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE
- Permit
- 07ELC-29469
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $77
- Contractor
- E-1 Electric
- Days from application to issue
- 10
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE
- Permit
- 07ELC-29470
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $77
- Contractor
- E-1 Electric
- Days from application to issue
- 10