Gentilly Woods

4653 Kendall Drive is in Gentilly Woods, zoned S-RS (Newer neighborhoods, single-family homes). The city has 8 permits on record here; the most recent, a renovation (structural) permit, was filed in March 2013. 6 are still open. On this block in the past year: 21 requests to 311 and 7 calls to police.

Zoning
S-RS
Historic district
None
Council district
D
Ward
9
Lot size
5,831 sq ft
Parcel
41110706

Everything on record here

8 records, newest first · 6 open

  1. Permit Renovation (Structural) Occupancy

    Elevate existing single to meet/be above the BFE. To elevate an existing structure, a foundation plan and other foundation details prepared and certified by a Louisiana registered Architect or a Louisiana registered Civil Engineer shall be available at the construction site for the foundation inspection. The foundation plan must show how the structure will be anchored to the foundation. No change in parking, no increase in livable area, and steps cannot exceed more that 6ft in required front yard, 5ft in rear yard. Electrical and mechanical permits are required.

    Permit
    13-07074-RNVS
    Type
    Renovation (Structural)
    Work
    Renovation (Structural)
    Estimated cost (applicant’s figure)
    $128,040
    Fees
    $705
    Contractor
    Tim Clark Construction,Llc
    Days from application to issue
    0
    Expires
    Sep 21, 2013

    See this permit on One Stop

  2. Permit Electrical Repair / Replacement / Addition Permit Issued

    LOWERING SERVICE- 13-07074

    Permit
    13-08706-ERPR
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $40
    Contractor
    Salvador P. Puleo II
    Days from application to issue
    0
    Expires
    Sep 20, 2013

    See this permit on One Stop

  3. Permit General Mechanical In Review

    Reset condenser / home elevation. jeremy ferret (#7163) 13-07074-RNVS / TIM CLARK SHORING

    Permit
    13-07345-MECH
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $45
    Contractor
    Jeremy Ferret, Sr.

    See this permit on One Stop

  4. Permit General Mechanical Application Acceptance - Approved

    *John Williams furnace A/C ck#2168

    Permit
    08MCH-06191
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $67
    Contractor
    Preferred A/C & Electriacl LLC
    Days from application to issue
    5
  5. Permit General Mechanical Inspection - Completed

    Don Knutson , check#3514 water heater,meter out over 6 months

    Permit
    08MCH-04819
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $50
    Contractor
    Don Knutson
    Days from application to issue
    5
  6. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    07ELC-22646
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $116
    Contractor
    Alble Elect Cont Inc
    Days from application to issue
    10
  7. Permit Emergency Permit Certificate of Occupancy - Issued w/Meter

    HURRICANE DAMAGE REPAIRS TO INCLUDE: FLOORS, SHEETROCK, ROOF, PLUMBING, ELECTRICAL AND OTHER REPAIRS AS NEEDED TO MAKE THE HOME LIVEABLE.

    Permit
    07BLD-03199
    Type
    Emergency Permit
    Work
    Emergency Permit
    Estimated cost (applicant’s figure)
    $75,000
    Fees
    $425
    Days from application to issue
    5
  8. Permit Certificate of Occupancy

    INSTALL TEMPORARY FEMA TRAILER.

    Permit
    06OCC-04404
    Type
    Certificate of Occupancy
    Work
    NA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $150