Gentilly Terrace
2664 Myrtle Street is in Gentilly Terrace, zoned HU-RD1 (Older neighborhoods, two-family homes on smaller lots). The city has 8 permits on record here; the most recent, a general mechanical permit, was filed in February 2008. 8 are still open. On this block in the past year: 14 requests to 311 and 31 calls to police.
- Zoning
- HU-RD1
- Historic district
- None
- National Register
- Edgewood Park Historic District
- Council district
- D
- Ward
- 8
- Lot size
- 6,266 sq ft
- Parcel
- 41111309
Everything on record here
8 records, newest first · 8 open
-
Permit General Mechanical Application Acceptance - Approved
rll-n-irsch-909-7275-reconnect-1-wh-ck-205
- Permit
- 08MCH-02922
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $50
- Contractor
- Noel A Irsch Jr
- Days from application to issue
- 5
-
Permit General Mechanical Application Acceptance - Approved
rll-n-irsch-909-7275-reconnect-1-wh-ck-205
- Permit
- 08MCH-02923
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $50
- Contractor
- Noel A Irsch Jr
- Days from application to issue
- 5
-
Permit General Mechanical Application Acceptance - Approved
RLL-R-PHILLIPS-915-9369-1-AC-1-WAF-CK-3593
- Permit
- 08MCH-02774
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $62
- Contractor
- Hauck Htg And A/C
- Days from application to issue
- 5
-
Permit General Mechanical Application Acceptance - Approved
RLL-R-PHILLIPS-915-9369-1-AC-CH-3593
- Permit
- 08MCH-02775
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $42
- Contractor
- Hauck Htg And A/C
- Days from application to issue
- 5
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE
- Permit
- 07ELC-31490
- Type
- Electrical Service / Circuit / Feeder
- Estimated cost (applicant’s figure)
- $0
- Fees
- $95
- Contractor
- Danos Electric
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE
- Permit
- 07ELC-31491
- Type
- Electrical Service / Circuit / Feeder
- Estimated cost (applicant’s figure)
- $0
- Fees
- $95
- Contractor
- Danos Electric
-
Permit Construction Loop Application Acceptance - Approved
TEMP POLE
- Permit
- 07ELC-31754
- Type
- Construction Loop
- Work
- Construction Loop
- Estimated cost (applicant’s figure)
- $0
- Fees
- $30
- Contractor
- Danos Electric
- Days from application to issue
- 10
-
Permit Mechanical
INSTALL MECHANICAL EQUIPMENT SINGLE-FAMILY DWELLING METER OUT OVER SIX MONTHS. KEITH REYNAUD - 469-2217
- Permit
- M01005531
- Type
- Mechanical
- Days from application to issue
- 1