Lower Ninth Ward

1717 Egania Street is in Lower Ninth Ward, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). The city has 9 permits on record here; the most recent, a construction loop permit, was filed in November 2026. 9 are still open. There was 1 past code enforcement case, the latest in April 2009, all closed. On this block in the past year: 18 requests to 311 and 6 calls to police.

Zoning
HU-RD2
Historic district
None
Council district
E
Ward
9
Lot size
7,716 sq ft
Parcel
41121625

Everything on record here

12 records, newest first · 11 open

  1. Permit Construction Loop Permit Issued

    Construction Loop - Overhead

    Permit
    26-33218-LOOP
    Type
    Construction Loop
    Work
    Construction Loop
    Estimated cost (applicant’s figure)
    $500
    Fees
    $40
    Contractor
    Barry Joseph Sorrell
    Days from application to issue
    1
    Expires
    May 11, 2027
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date

    See this permit on One Stop

  2. Permit Electrical Service / Circuit / Feeder Permit Issued

    ELEC-Wiring 200 amp serv panel & approximately 20 new branch circuits. attach permit to. # 26-17695-RNVN

    Permit
    26-33216-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $8,500
    Fees
    $160
    Contractor
    Barry Joseph Sorrell
    Days from application to issue
    1
    Expires
    May 11, 2027
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date

    See this permit on One Stop

  3. City record Electrical Service / Circuit / Feeder Application Submitted

    ELEC-Wiring 200 amp serv panel & approximately 20 new branch circuits. attach permit to. # 26-17695-RNVN

    1. Application Submitted
    2. Electrical review Pending

    See this record on One Stop · checked Nov 11, 2026

  4. City record Construction Loop Application Submitted

    Construction Loop - Overhead

    1. Application Submitted
    2. Electrical review Pending

    See this record on One Stop · checked Nov 11, 2026

  5. Permit Plumbing Permit Permit Issued

    Residential plumbing installation, including new sanitary drain, waste, and vent piping, plumbing fixture connections, and connection to the existing sewer system, as shown on the city-approved plumbing riser diagram. Work associated with renovation permit #26-17695-RNVN.

    Permit
    26-31983-PLMB
    Type
    Plumbing Permit
    Work
    Plumbing Permit
    Estimated cost (applicant’s figure)
    $0
    Fees
    $100
    Contractor
    Daniel Bolner, Jr
    Days from application to issue
    4
    Expires
    May 2, 2027
    1. SWB Filing Fee Paid
    2. Plumbing Final
    3. Plumbing Underground
    4. Plumbing Rough In/ Top Out
    5. Plumbing Tie In
    6. Application Submitted Complete
    7. Application Review (SWB) Complete
    8. SWBNO Plumbing Intake Approved
    9. Permit Approved Complete
    10. SWBNO Plumbing Approval Approved
    11. Permit Issued Complete

    See this permit on One Stop

  6. Permit Mechanical HVAC Permit Issued

    Installation of a 3-ton system TEMPSTAR 15 SEER with electric heating, Venting bathrooms and dryer

    Permit
    26-30315-HVAC
    Type
    Mechanical HVAC
    Work
    Mechanical HVAC
    Estimated cost (applicant’s figure)
    $8,840
    Fees
    $65
    Contractor
    Reinaldo Lopez
    Days from application to issue
    1
    Expires
    Apr 15, 2027
    1. Air Conditioning Paid
    2. Mechanical Paid
    3. Warm Air Furnaces Paid
    4. Duct Leakage
    5. Warm Air Furnace
    6. Whole House Infiltration
    7. Rough Mech HVAC Res
    8. Air Conditioning
    9. Application Submitted Complete
    10. Application submitted
    11. Application Review Complete
    12. Permit Approved Complete
    13. Permit Issued Complete
    14. Mechanical Permit Review Complete
    15. Application review
    16. Permit approved
    17. Issue date

    See this permit on One Stop

  7. Permit Renovation (Non-Structural) Permit Issued

    Non structural renovation with MEP as per plans. *FINAL INSPECTION* FEMA EC BFE +1.3 NAVD

    Permit
    26-17695-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $72,730
    Fees
    $498
    Contractor
    JLV Construction, LLC
    Days from application to issue
    82
    Expires
    Mar 2, 2027
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date

    See this permit on One Stop

  8. Code enforcement Case ENVHADJ-2004306EH Closed

    A hearing was held on 04/10/2009 with a result of "Found Guilty". The case was subsequently closed.

    1. Inspection: Inspection Complete
    2. Hearing: Initial Hearing Found Guilty

    The city links this case to permit 26-33218-LOOP.

  9. Permit Mechanical Permit Issuance Active

    INSTALL GAS W\H AND GAS RECONNECT. JEFF RUSK (#2098 \ 2101)

    Permit
    08MCH-10286
    Type
    Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $50
  10. Permit Emergency Permit Application Acceptance - Approved No Review

    Katrina repairs work to include:Electrical,Plumbing,Hvac,Interior Finishes and Appliances.

    Permit
    08BLD-04706
    Type
    Emergency Permit
    Work
    Emergency Permit
    Estimated cost (applicant’s figure)
    $25,000
    Fees
    $175
    Days from application to issue
    5
  11. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    08ELC-12205
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $120
    Contractor
    Malone Electrical
    Days from application to issue
    10
  12. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    FEMA TRAILER

    Permit
    06ELC-42548
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $63
    Contractor
    Franklin Arms
    Days from application to issue
    10