Holy Cross
716 Egania Street is in Holy Cross, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Holy Cross historic district under full HDLC control, so most exterior changes need approval first. The city has 8 permits on record here; the most recent, an electrical repair / replacement / addition permit, was filed in September 2010. 8 are still open. There was 1 past code enforcement case, the latest in April 2009, all closed. On this block in the past year: 3 requests to 311 and 2 calls to police.
- Zoning
- HU-RD2
- Historic district
- Holy Cross (Full control)
- National Register
- Holy Cross Historic District
- Council district
- E
- Ward
- 9
- Lot size
- 9,374 sq ft
- Parcel
- 41125493
Everything on record here
9 records, newest first · 8 open
-
Permit Electrical Repair / Replacement / Addition Permit Issuance - Active
VACANCY
- Permit
- 10ELC-09846
- Type
- Electrical Repair / Replacement / Addition
- Work
- Repair-Replacement-Addition
- Estimated cost (applicant’s figure)
- $0
- Fees
- $40
- Contractor
- Curtis & Son's Electric
- Days from application to issue
- 0
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE- 07BLD-07430
- Permit
- 09ELC-17343
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $86
- Contractor
- Curtis & Son's Electric
- Days from application to issue
- 10
-
Code enforcement Case ENVHADJ-961004 Closed
A hearing was held on 04/10/2009 with a result of "Found Guilty". The case was subsequently closed.
- Inspection: Inspection Complete
- Hearing: Initial Hearing Found Guilty
The city links this case to permit 09ELC-17343.
-
Permit Mechanical Permit Issuance Active
INSTALL 2-ELEC WAF AND A\C. WANDELL SMITH (#1206)
- Permit
- 08MCH-16074
- Type
- Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $94
-
Permit General Mechanical Application Acceptance - Approved
INSTALL ELEC WAF AND 3-TON A\C. WANDALL SMITH (#1206)
- Permit
- 08MCH-16076
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $62
- Contractor
- Dell Tech Air LLC
- Days from application to issue
- 5
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE
- Permit
- 08ELC-02723
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $105
- Contractor
- Curtis & Son's Electric
- Days from application to issue
- 10
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE
- Permit
- 08ELC-02724
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $92
- Contractor
- Curtis & Son's Electric
- Days from application to issue
- 10
-
Permit Emergency Permit Certificate of Occupancy - Issued w/Meter
HURRICANE DAMAGE REPAIRS TO INCLUDE: FLOORS, SHEETROCK, ROOF, PLUMBING, ELECTRICAL, AND CONSTRUCT CAMELBACK ADDITION AS PER HDLC COA PK1600.
- Permit
- 07BLD-07430
- Type
- Emergency Permit
- Work
- Emergency Permit
- Estimated cost (applicant’s figure)
- $16,500
- Fees
- $393
- Days from application to issue
- 5
-
Permit Construction Loop Application Acceptance - Approved
construction loop
- Permit
- 07ELC-17554
- Type
- Construction Loop
- Work
- Construction Loop
- Estimated cost (applicant’s figure)
- $0
- Fees
- $30
- Contractor
- Curtis & Son's Electric
- Days from application to issue
- 10