Holy Cross

723 Gordon Street is in Holy Cross, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Holy Cross historic district under full HDLC control, so most exterior changes need approval first. The city has 7 permits on record here; the most recent, an electrical service / circuit / feeder permit, was filed in January 2008. 7 are still open. There were 2 past code enforcement cases, the latest in September 2016, all closed. On this block in the past year: 0 requests to 311 and 3 calls to police.

Zoning
HU-RD2
Historic district
Holy Cross (Full control)
Council district
E
Ward
9
Lot size
7,884 sq ft
Parcel
41125924

Everything on record here

9 records, newest first · 7 open

  1. Code enforcement Case 16-09783-MPM Closed

    The property was inspected on 09/21/2016 with a finding of "Violation: No WIP". The file was subsequently closed.

    1. Inspection: Inspection Violation: No WIP
    2. Violation: 160 Weeds and Plant Growth
    3. Violation: 164 Motor Vehicles

    The city links this case to permit 08ELC-01919.

  2. Code enforcement Case 14-10934-MPM Closed

    The property was inspected on 05/21/2015 with a finding of "No Violation". The file was subsequently closed.

    1. Inspection: Inspection No Violation

    The city links this case to permit 08ELC-01919.

  3. Permit Electrical Permit Issuance Active

    REWIRE

    Permit
    08ELC-01919
    Type
    Electrical
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
  4. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    08ELC-01920
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $114
    Contractor
    Langdon Mickens Sr
    Days from application to issue
    10
  5. Permit Emergency Permit Application Acceptance - Approved No Review

    REPAIRS OF DAMAGES CAUSED BY KATRINA: DRYWALL, FLOORING, ELECTRICAL, PLUMBING.

    Permit
    06BLD-10131
    Type
    Emergency Permit
    Work
    Emergency Permit
    Estimated cost (applicant’s figure)
    $12,000
    Fees
    $110
    Days from application to issue
    5
  6. Permit Residential APPROVAL

    Remove and replace water damaged drywall, inspect electrical, mechanical and plumbing systems and repair/replace where necessary.Alteration and Kitchen Renovations, Replace Cabinets, Fixtures, Flooring, Sheetrocking, Painting, Electrical and Plumbing

    Permit
    ACCELA-23149
    Type
    Residential
    Work
    Repair
    Estimated cost (applicant’s figure)
    $30,000
  7. Permit Electrical Service / Circuit / Feeder Inspection - Completed

    increase

    Permit
    05ELC-04234
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $60
    Contractor
    Chris Ray Elec. Service
    Days from application to issue
    10
  8. Permit Electrical Service / Circuit / Feeder Inspection - Completed

    increase

    Permit
    05ELC-04235
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $60
    Contractor
    Chris Ray Elec. Service
    Days from application to issue
    10
  9. Permit General Mechanical Inspection - Completed

    RLB/MAGEE OOS OVER 6 MONS.; W/H

    Permit
    04MCH-03898
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $50
    Contractor
    Megee & Sons Plbg.
    Days from application to issue
    5