Whitney

428 Pacific Avenue is in Whitney, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Algiers Point historic district under full HDLC control, so most exterior changes need approval first. The city has 4 permits on record here; the most recent, an HDLC COA permit, was filed in January 2024. 3 are still open. On this block in the past year: 14 requests to 311 and 1 call to police.

Zoning
HU-RD2
Historic district
Algiers Point (Full control)
National Register
Algiers Point Historic District
Council district
C
Ward
15
Lot size
3,884 sq ft
Parcel
41130299

Everything on record here

4 records, newest first · 3 open

  1. Permit HDLC COA Permit Issued

    Remove existing Asphalt Shingle Roof. Install IKO "DYNASTY" Shingle Roof, "Castle Gray" in color. Remove, clean and reinstall Historic Ridge Tile.

    Permit
    24-01551-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Jul 19, 2024

    See this permit on One Stop

  2. Permit Renovation (Non-Structural) Permit Cancelled

    Remove existing Asphalt Shingle Roof. Install IKO "DYNASTY" Shingle Roof, "Castle Gray" in color. Remove, clean and reinstall Historic Ridge Tile.

    Permit
    24-01551-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $17,500
    Fees
    $315
    Contractor
    All-Ways Roofing L.L.C.
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved

    See this permit on One Stop

  3. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    CIRCUITS

    Permit
    07ELC-06878
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $39
    Contractor
    Stuart Electric Inc
    Days from application to issue
    10
  4. Permit General Mechanical Inspection - Completed

    out over 6 months 150,000 btu. ROBLES

    Permit
    04MCH-00029
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Lagniappe Rooter Inc.
    Days from application to issue
    5