Whitney

624 Pacific Avenue is in Whitney, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Algiers Point historic district under full HDLC control, so most exterior changes need approval first. The city has 5 permits on record here; the most recent, an HDLC COA permit, was filed in June 2025. 2 are still open. On this block in the past year: 6 requests to 311 and 4 calls to police.

Zoning
HU-RD2
Historic district
Algiers Point (Full control)
National Register
Algiers Point Historic District
Council district
C
Ward
15
Lot size
4,069 sq ft
Parcel
41130332

Everything on record here

5 records, newest first · 2 open

  1. Permit HDLC COA Permit Cancelled

    Remove fans w/ light at front porch of a one-story, single-family residential building.

    Permit
    25-18854-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    13
    Expires
    Jan 3, 2026

    See this permit on One Stop

  2. Permit Electrical Service / Circuit / Feeder Permit Issued

    Emergency disconnect was set up with Entergy to have power cut off on the morning of 6/11/2025 and turned back on after third party inspection in the evening of 6/11/2022. Demo existing stem meter and breaker panel and discard. Build new 200 amp service with new stem, meter bank, breaker panel and breakers. Update ground to new code standards and install new external ground bridge and plug on surge protectors.

    Permit
    25-17759-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $2,500
    Fees
    $100
    Contractor
    Justin Paul Whipple
    Days from application to issue
    9
    Expires
    Dec 19, 2025
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date

    See this permit on One Stop

  3. Permit Electrical Service / Circuit / Feeder Other

    Emergency disconnect was set up with Entergy to have power cut off on the morning of 6/11/2025 and turned back on after third party inspection in the evening of 6/11/2022. Demo existing stem meter and breaker panel and discard. Build new 200 amp service with new stem, meter bank, breaker panel and breakers. Update ground to new code standards and install new external ground bridge and plug on surge protectors.

    Permit
    25-17758-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $2,500
    Fees
    $100
    Contractor
    Justin Paul Whipple
    1. Application submitted
    2. Application review

    See this permit on One Stop

  4. Permit General Mechanical Permit Finaled

    rll-d-clay-283-9050-1-gas-line-ck-1272

    Permit
    13-08255-MECH
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $15
    Contractor
    David Clay Sr.
    Days from application to issue
    1
    Expires
    Sep 19, 2013

    See this permit on One Stop

  5. Permit General Mechanical Inspection - Completed

    rll-v-giordano-362-1564-reconnect-ck-24452

    Permit
    06MCH-13690
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Advance Plmg.
    Days from application to issue
    5