Algiers Point
519 Seguin Street is in Algiers Point, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Algiers Point historic district under full HDLC control, so most exterior changes need approval first. The city has 10 permits on record here; the most recent, an HDLC COA permit, was filed in February 2023. 9 are still open. On this block in the past year: 9 requests to 311 and 6 calls to police.
- Zoning
- HU-RD2
- Historic district
- Algiers Point (Full control)
- National Register
- Algiers Point Historic District
- Council district
- C
- Ward
- 15
- Lot size
- 5,625 sq ft
- Parcel
- 41144373
Everything on record here
10 records, newest first · 9 open
-
Permit HDLC COA Permit Issued
Remove Existing Asphalt Shingle Roof. Install new, Owens Corning "Duration" Estate Gray Shingle Roof. Remove, Clean and Reinstall Ridge Tile. Remove Black Tar on Chimneys and Install 24ga Galvanized Steel Chimney Flashings.
- Permit
- 23-03299-HDLC
- Type
- HDLC COA
- Work
- HDLC COA
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 0
- Expires
- Aug 7, 2023
-
Permit Renovation (Non-Structural) In Review
Remove Existing Asphalt Shingle Roof. Install new, Owens Corning "Duration" Estate Gray Shingle Roof. Remove, Clean and Reinstall Ridge Tile. Remove Black Tar on Chimneys and Install 24ga Galvanized Steel Chimney Flashings.
- Permit
- 23-03299-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $11,000
- Fees
- $263
- Contractor
- All Ways Roofing LLC
- Application submitted
- Application review
- Zoning review
- Plan review
- Permit approved
-
Permit HDLC COA Permit Issued
Siding replacement.
- Permit
- 12-25651-HDLC
- Type
- HDLC COA
- Work
- HDLC COA
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 0
- Expires
- Mar 26, 2013
-
Permit HDLC COA Permit Cancelled
Isaac repairs
- Permit
- 12-25256-HDLC
- Type
- HDLC COA
- Work
- HDLC COA
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
-
Permit Electrical Service / Circuit / Feeder Permit Issued
AFTER HOURS- REPLACE SERVICE
- Permit
- 12-23437-SERV
- Type
- Electrical Service / Circuit / Feeder
- Work
- Electrical Service / Circuit / Feeder
- Estimated cost (applicant’s figure)
- $0
- Fees
- $290
- Days from application to issue
- 0
- Expires
- Mar 5, 2013
Placed here by the building address from “519 Seguin St APT. A”.
-
Permit Electrical Service / Circuit / Feeder Permit Issued
REPLACE SERVICE
- Permit
- 12-23439-SERV
- Type
- Electrical Service / Circuit / Feeder
- Work
- Electrical Service / Circuit / Feeder
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
- Days from application to issue
- 0
- Expires
- Mar 5, 2013
Placed here by the building address from “519 Seguin St APT. B”.
-
Permit Electrical Service / Circuit / Feeder Permit Issued
REPLACE SERVICE
- Permit
- 12-23441-SERV
- Type
- Electrical Service / Circuit / Feeder
- Work
- Electrical Service / Circuit / Feeder
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
- Days from application to issue
- 0
- Expires
- Mar 5, 2013
Placed here by the building address from “521 Seguin St APT. A”.
-
Permit Electrical Service / Circuit / Feeder Permit Issued
REPLACE SERVICE
- Permit
- 12-23444-SERV
- Type
- Electrical Service / Circuit / Feeder
- Work
- Electrical Service / Circuit / Feeder
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
- Days from application to issue
- 0
- Expires
- Mar 5, 2013
Placed here by the building address from “521 Seguin St APT. B”.
-
Permit General Mechanical Inspection - Completed
METER OUT OVER SIX MONTHS. RICHARD COTTEN (#9975)
- Permit
- 10MCH-01933
- Type
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $30
- Contractor
- Richard Cotten & Sons
Placed here by a close spelling of the street from “519 Sequin St B Suite”.
-
Permit General Mechanical Inspection - Completed
RLB//COTTEN// ENTERGY LEAK
- Permit
- 05MCH-00772
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $30
- Contractor
- Richard Cotten & Sons
- Days from application to issue
- 5