Tall Timbers - Brechtel
5258 Tullis Drive is in Tall Timbers - Brechtel, zoned S-RM1 (Newer neighborhoods, multi-family housing up to four stories). The city has 3 permits on record here; the most recent, an electrical repair / replacement / addition permit, was filed in June 2010. 3 are still open. There is 1 open code enforcement case. On this block in the past year: 4 requests to 311 and 14 calls to police.
- Zoning
- S-RM1
- Historic district
- None
- Council district
- C
- Ward
- 15
- Lot size
- 2,693 sq ft
- Parcel
- 41145608
Everything on record here
4 records, newest first · 4 open
-
Code enforcement Case 25-04405-MPM Judgment
A hearing was held on 05/27/2025 with a result of "Guilty".
- Inspection
- Title Research
- Hearing
- Judgment
- In Compliance
- Inspection: Inspection Violation: No WIP
- Violation: 167 Exterior Surfaces
- Violation: 167 Paint or Protective Treatment
- Violation: 167 Siding and Masonry
- Inspection: Posting of Hearing Notice Violation: No WIP
- Violation: 167 Exterior Surfaces
- Violation: 167 Paint or Protective Treatment
- Violation: 167 Siding and Masonry
- Hearing: Initial Hearing Guilty
The city links this case to permit 10ELC-05490.
-
Permit Electrical Repair / Replacement / Addition Permit Issuance - Active
VACANCY
- Permit
- 10ELC-05490
- Type
- Electrical Repair / Replacement / Addition
- Work
- Repair-Replacement-Addition
- Estimated cost (applicant’s figure)
- $0
- Fees
- $40
- Contractor
- Bill Schell's Electric, LLC.
- Days from application to issue
- 0
-
Permit Renovation (Non-Structural) Application Acceptance - Approved No Review
KITCHEN REPAIR, NEW CABINETS, COUNTER TOP, DRYWALL REPAIR, AND PAINT
- Permit
- 08BLD-05836
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $0
- Fees
- $150
- Days from application to issue
- 5
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
service change
- Permit
- 07ELC-17569
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $60
- Contractor
- Schell Electric
- Days from application to issue
- 10