Holy Cross

5114 Chartres Street is in Holy Cross, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Holy Cross historic district under full HDLC control, so most exterior changes need approval first. The city has 8 permits on record here; the most recent, an electrical service / circuit / feeder permit, was filed in September 2010. 8 are still open. There was 1 past code enforcement case, the latest in January 2010, all closed. On this block in the past year: 3 requests to 311 and 13 calls to police.

Zoning
HU-RD2
Historic district
Holy Cross (Full control)
National Register
Holy Cross Historic District
Council district
E
Ward
9
Lot size
3,204 sq ft
Parcel
41183082

Everything on record here

9 records, newest first · 8 open

  1. Permit Electrical Service / Circuit / Feeder Inspection - Completed

    REWIRE- 09CIT-05891

    Permit
    10ELC-08974
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $100
    Contractor
    Three Strikes Elec.
    Days from application to issue
    0
  2. Permit General Mechanical Inspection - Completed

    INSTALL GAS WAF AND 3-TON A\C. MARK FLOYD (#1988)

    Permit
    10MCH-08028
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $70
    Contractor
    Arc Air Inc.
    Days from application to issue
    5
  3. Permit General Mechanical Inspection - Completed

    rll-k-rader-832-5924-gas-line-1-wh-ck-36865

    Permit
    10MCH-04765
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $35
    Contractor
    Carter & Sons
    Days from application to issue
    5
  4. Code enforcement Case HCEC-10-00020 Closed

    The case was filed on 01/11/2010 but has since been closed without further action.

    1. Inspection: Inspection Work In Progress

    The city links this case to permit 10MCH-08028.

  5. Permit Construction Loop Application Acceptance - Approved

    TEMP POLE- 09CIT-05891

    Permit
    09ELC-14733
    Type
    Construction Loop
    Work
    Construction Loop
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Three Strikes Elec.
    Days from application to issue
    10
  6. Permit Repair Certificate of Occupancy - Issued w/Meter

    remove/replace sheetrock 4', complete electrical, plumbing and HVAC. Install cabinets, floors, interior trim and paint complete

    Permit
    09CIT-05891
    Type
    Repair
    Work
    Homeowner Repair
    Estimated cost (applicant’s figure)
    $50,000
    Fees
    $300
    Days from application to issue
    0
  7. Permit Electrical Service / Circuit / Feeder Inspection - Completed

    new const

    Permit
    05ELC-07022
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $90
    Contractor
    Ele Unlimited Co
    Days from application to issue
    10
  8. Permit Construction Loop Inspection - Completed

    temp pole

    Permit
    05ELC-05979
    Type
    Construction Loop
    Work
    Construction Loop
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Ele Unlimited Co
    Days from application to issue
    10
  9. Permit New Construction Application Acceptance - Approved No Review

    New construction of a 1 story single family residence as per BZA.DKT#79/05,HDLC C of A#:H217 and Sketch.Fema Flood Zone:B-Elevation Requirement:26.73 also in Accordance with Ord.21546 and Front Yard Averaging.

    Permit
    05BLD-01793
    Type
    New Construction
    Work
    New
    Estimated cost (applicant’s figure)
    $65,000
    Fees
    $563
    Days from application to issue
    7