Fairgrounds

3435 Parkview Place is in Fairgrounds, zoned HU-RS (Older neighborhoods, single-family homes). The city has 11 permits on record here; the most recent, an electrical service / circuit / feeder permit, was filed in July 2009. 11 are still open. On this block in the past year: 2 requests to 311 and 4 calls to police.

Zoning
HU-RS
Historic district
None
Council district
A
Ward
7
Lot size
4,466 sq ft
Parcel
41184266

Everything on record here

12 records, newest first · 11 open

  1. Short-term rental Short Term Rental license application Expired
    License
    18STR-20793
    Type
    Short Term Rental
    Operator
    Jeff Morici
    Issued
    Jan 15, 2019
    Expires
    Jan 14, 2020
  2. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    09ELC-11495
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $120
    Contractor
    Complete Electrical Service L.L.C
    Days from application to issue
    10
  3. Permit General Mechanical Application Acceptance - Approved

    INSTALL TWO 2.5-TON CONDENSER. FRANK NATAL JR. (#21980)

    Permit
    09MCH-06700
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $54
    Contractor
    Natals A/C
    Days from application to issue
    5
  4. Permit Renovation (Structural) Certificate of Occupancy - Issued No Meter

    Elevation of a building: To elevate an existing structure a foundation plan and other foundation details prepared and certified by a Louisiana Registered Architect or a Louisiana Registered Engineer shall be available at the construction site for the foundation inspection. The foundation must show how the structure will be anchored to the foundation. This building should be elevated to minimum of +2.26' BFE (base flood elevation)or above. As shown on the Benchmark Certificate issued 03/20/2009

    Permit
    09BLD-02569
    Type
    Renovation (Structural)
    Work
    Renovation (Structural)
    Estimated cost (applicant’s figure)
    $0
    Fees
    $125
    Days from application to issue
    5
  5. Permit Construction Loop Application Acceptance - Approved

    TEMP POLE

    Permit
    09ELC-06065
    Type
    Construction Loop
    Work
    Construction Loop
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Complete Electrical Service L.L.C
    Days from application to issue
    10
  6. Permit Renovation (Non-Structural) Inspection - Completed

    Non-structual renovations to a single family residence work to include: Electrical,Hvac,Plumbing,Sheetrocking;Painting and other repairs to make house habitable.

    Permit
    09BLD-01604
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $68,275
    Fees
    $395
    Days from application to issue
    5
  7. Permit Residential

    Replace interior walls, install new electrical, plumbing, mechanical equipment.

    Permit
    PRTL-09CIT-00086
    Type
    Residential
    Work
    Homeowner Repair
    Estimated cost (applicant’s figure)
    $50,000
    Fees
    $0
  8. Permit Construction Loop Application Acceptance - Approved

    FEMA TRAILER

    Permit
    06ELC-12907
    Type
    Construction Loop
    Work
    Construction Loop
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Bradley Electric Service
    Days from application to issue
    10
  9. Permit Construction Loop Application Acceptance - Approved

    fema trailer

    Permit
    05ELC-13907
    Type
    Construction Loop
    Work
    Construction Loop
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Palco Servuce
    Days from application to issue
    10
  10. Permit Certificate of Occupancy

    INSTALL F.E.M.A TRAILER

    Permit
    05OCC-01503
    Type
    Certificate of Occupancy
    Work
    NA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $150
  11. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    rewire

    Permit
    05ELC-08202
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $105
    Contractor
    Nick Ciaccio
    Days from application to issue
    10
  12. Permit Construction Loop Application Acceptance - Approved

    temp pole

    Permit
    05ELC-08203
    Type
    Construction Loop
    Work
    Construction Loop
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Nick Ciaccio
    Days from application to issue
    10