French Quarter

1026 Conti Street is in French Quarter, zoned VCC-2 (French Quarter shops and services, including the main shopping area). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 45 permits on record here; the most recent, a dumpster/construction zone permit, was filed in September 2026. 43 are still open. On this block in the past year: 4 requests to 311 and 77 calls to police.

Zoning
VCC-2
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
4
Lot size
2,445 sq ft
Parcel
41185658

Everything on record here

45 records, newest first · 43 open

  1. Permit Dumpster/Construction Zone Application Accepted

    Off Loading Furniture

    Permit
    26-25708-RCZD
    Type
    Dumpster/Construction Zone
    Work
    Dumpster/Construction Zone
    Estimated cost (applicant’s figure)
    $0
    Fees
    $100
    1. Construction Zone Unpaid
    2. Construction Zone Application Fee Unpaid
    3. Application Submitted Complete
    4. Public Works - Traffic Pending
    5. Parks and Parkways Tree Review Approved

    See this permit on One Stop

    Placed here by the building address from “1026 Conti St, Unit 1”.

  2. Permit VCC General Work Permit Issued

    To make repairs to building and correct violations as per materials stamped VCC approved 07/07/2025. Work includes: • Repair/replacement of gallery fascia and decking, purlins as necessary and all to match existing • Repair/replacement of exterior door components and window trim to match existing • Repositioning of existing out of place gallery post • Removal of unpermitted window unit AC and reinstallation of previously removed transom window • Reinstallation of a pair of louvered shutters on the N. Rampart elevation • Painting of back flow preventer and other plumbing components to match adjacent wall surface • To prepare for painting by washing using a low water pressure (400 psi max) and/or sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft, with maximum Portland cement content not to exceed 1 part to 12) and to paint as follows to match existing conditions: • Walls: SW Chatroom, 6171, flat or satin finish • Wooden elements including doors, windows, frames: BM Atrium Whites 79, semigloss • Shutters: BM Essex Green 9643 NOTE: All shutter hardware to match adjacent surface; hinge attached to shutter should match shutter color, and hinge attached to trim should match trim. Shutter hardware should not be painted black. Additionally, outriggers under balconies or galleries should be painted white as they are not decorative ironwork elements. Failure to exactly match

    Permit
    25-18814-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Jan 7, 2026

    See this permit on One Stop

  3. Permit Renovation (Non-Structural) Permit Issued

    Exterior Work Only to Remedy VCC Violations as per photos.

    Permit
    25-18814-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $14,775
    Fees
    $195
    Contractor
    ARC MECHANICAL
    Days from application to issue
    52
    Expires
    Feb 11, 2026
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date

    See this permit on One Stop

  4. Permit VCC General Work Permit Finaled

    To install a new wood operable louvered shutters on the middle window on the third floor of the Conti elevation – shutters to exactly match adjacent shutters in color, size, material, detail, profile and exposure. To repair existing shutters on the N. Rampart elevation to match previously existing condition To place existing camera wiring into existing junction boxes and cover – covers to be painted to match existing wall color. NOTE: Approval of exterior security cameras to be permitted separately. To spray any vegetation growing from the building with herbicide and allow to wilt for 3-5 days prior to removal of remaining plant material – repair masonry as per VCC standard detail (attached) with amount of Portland Cement not to exceed 1 part in 12. To repair/replace damaged downspout to match existing To paint existing wall ties located on the Bienville elevation and Burgundy elevation of the service building a color similar to the existing exposed brick color – no exposed brick to be painted. All work as per scope of work stamped VCC approved 10/17/18. All repair/replacement work shall match existing in color, size, material, detail, profile and exposure. Failure to exactly match materials, details, profiles, exposures, or VCC mortar as specified in permit will result in a VCC violation and mandated repair of improper work. NOTE: Permit issued in response to violations. Work shall commence within 30 days from the date of permit issuance. Work must be compl

    Permit
    18-28450-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    42
    Expires
    Apr 17, 2019

    See this permit on One Stop

  5. Permit Renovation (Non-Structural) Other

    Correct VCC violations: Repair/replace shutters to match existing as needed; repair balcony fascia; install electrical wiring in conduit; remove vegetation from building walls; repair/replace downspout; paint as necessary.

    Permit
    18-28450-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $2,200
    Fees
    $113
    Days from application to issue
    37
    Expires
    Apr 4, 2019
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date

    See this permit on One Stop

  6. Permit Home Business Permit Issued

    CERTIFICATE OF OCCUPANCY FOR RED LIGHT TOURS, LLC, AND REVENUE CASE #2731. CERTIFICATE APPROVED FOR OFFICE USE ONLY.

    Permit
    12-28508-HOME
    Type
    Home Business
    Estimated cost (applicant’s figure)
    $0
    Fees
    $190
    Days from application to issue
    0
  7. Permit General Mechanical Inspection - Completed

    install electric waterheater/anthony /ck#11412.

    Permit
    11MCH-02523
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $20
    Contractor
    Resident Piping Spec
    Days from application to issue
    5
  8. Permit General Mechanical Inspection - Completed

    install electric waterheater/anthony /ck#11412.

    Permit
    11MCH-02526
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $20
    Contractor
    Resident Piping Spec
    Days from application to issue
    5
  9. Permit General Mechanical Inspection - Completed

    install electric waterheater/anthony /ck#11412.

    Permit
    11MCH-02529
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $20
    Contractor
    Resident Piping Spec
    Days from application to issue
    5
  10. Permit General Mechanical Inspection - Completed

    install electric waterheater/anthony /ck#11412.

    Permit
    11MCH-02533
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $20
    Contractor
    Resident Piping Spec
    Days from application to issue
    5
  11. Permit General Mechanical Inspection - Completed

    INSTALL 1.5-TON A\C AND ELEC WAF. *07COM-00087 JOHN LOGIUDICE (#0015694) V-CARRE * 090322 *APT #4-FL 1ST.

    Permit
    11MCH-02542
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $65
    Contractor
    Year Round Htg & A/C
    Days from application to issue
    0
  12. Permit General Mechanical Inspection - Completed

    INSTALL 1.5-TON A\C AND ELEC WAF. *07COM-00087 JOHN LOGIUDICE (#0015694) V-CARRE * 090322 *APT #5-FL 1ST.

    Permit
    11MCH-02543
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $65
    Contractor
    Year Round Htg & A/C
    Days from application to issue
    0
  13. Permit General Mechanical Inspection - Completed

    INSTALL 1.5-TON A\C AND ELEC WAF. *07COM-00087 JOHN LOGIUDICE (#0015694) V-CARRE * 090322 *APT #6 FL2

    Permit
    11MCH-02544
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $65
    Contractor
    Year Round Htg & A/C
    Days from application to issue
    0
  14. Permit General Mechanical Inspection - Completed

    INSTALL 2-TON A\C AND ELEC WAF. *07COM-00087 JOHN LOGIUDICE (#0015694) V-CARRE * 090322 *APT #7\ 2ND

    Permit
    11MCH-02545
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $65
    Contractor
    Year Round Htg & A/C
    Days from application to issue
    0
  15. Permit Electrical Service / Circuit / Feeder Permit Issuance - Active

    PERMIT EXTENSION & LOW VOLTAGE- 07COM-00087

    Permit
    11ELC-03147
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $43
    Contractor
    Direct Contractors
    Days from application to issue
    0
  16. Permit Electrical Service / Circuit / Feeder Permit Issuance - Active

    PERMIT EXTENSION & LOW VOLTAGE- 07COM-00087

    Permit
    11ELC-03148
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $263
    Contractor
    Direct Contractors
    Days from application to issue
    0
  17. Permit General Mechanical Inspection - Completed

    installation of electric waterheater/anthony /ck#11306.

    Permit
    11MCH-00314
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $20
    Contractor
    Resident Piping Spec
    Days from application to issue
    5
  18. Permit General Mechanical Inspection - Completed

    installation of electric waterheater/anhony /ck#11306.

    Permit
    11MCH-00315
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $20
    Contractor
    Resident Piping Spec
    Days from application to issue
    5
  19. Permit General Mechanical Inspection - Completed

    installation of electric waterheater/anthony /ck#11306.

    Permit
    11MCH-00316
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $20
    Contractor
    Resident Piping Spec
    Days from application to issue
    5
  20. Permit Certificate of Occupancy Certificate Issued No Meter

    THIS TEMPORARY CERTIFICATE OF OCCUPANCY IS VALID FOR 180 DAYS UNITS 1, 2 & 3 ONLY BUILDING PERMIT 07COM-00087

    Permit
    11OCC-00004
    Type
    Certificate of Occupancy
    Work
    NA
    Estimated cost (applicant’s figure)
    $7,000
    Fees
    $125
  21. Permit General Mechanical Inspection - Completed

    INSTALL ELEC WAF AND A\C.*07COM-00087 JOHN LOGIUDICE (#0015488)

    Permit
    10MCH-12237
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $65
    Contractor
    Year Round Htg & A/C
    Days from application to issue
    0
  22. Permit General Mechanical Inspection - Completed

    INSTALL ELEC WAF AND A\C.*07COM-00087 JOHN LOGIUDICE (#0015488)

    Permit
    10MCH-12238
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $65
    Contractor
    Year Round Htg & A/C
    Days from application to issue
    0
  23. Permit General Mechanical Inspection - Completed

    INSTALL ELEC WAF AND A\C.*07COM-00087 JOHN LOGIUDICE (#0015488)

    Permit
    10MCH-12239
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $65
    Contractor
    Year Round Htg & A/C
    Days from application to issue
    0
  24. Permit Electrical Service / Circuit / Feeder Permit Issuance - Active

    RENEW OLD PERMIT- 07COM-00087

    Permit
    10ELC-03498
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $115
    Contractor
    Direct Contractors
    Days from application to issue
    0
  25. Permit Electrical Service / Circuit / Feeder Permit Issuance - Active

    RENEW OLD PERMIT- 07COM-00087

    Permit
    10ELC-03499
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $380
    Contractor
    Direct Contractors
    Days from application to issue
    0
  26. Permit Electrical Service / Circuit / Feeder Permit Issuance - Active

    RENEW OLD PERMIT- 07COM-00087

    Permit
    10ELC-03500
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $160
    Contractor
    Direct Contractors
    Days from application to issue
    0
  27. Permit Electrical Service / Circuit / Feeder Permit Issuance - Active

    RENEW OLD PERMIT- 07COM-00087

    Permit
    10ELC-03501
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $160
    Contractor
    Direct Contractors
    Days from application to issue
    0
  28. Permit Electrical Service / Circuit / Feeder Permit Issuance - Active

    RENEW OLD PERMIT- 07COM-00087

    Permit
    10ELC-03502
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $405
    Contractor
    Direct Contractors
    Days from application to issue
    0
  29. Permit Electrical Service / Circuit / Feeder Permit Issuance - Active

    RENEW OLD PERMIT- 07COM-00087

    Permit
    10ELC-03503
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $145
    Contractor
    Direct Contractors
    Days from application to issue
    0
  30. Permit Electrical Service / Circuit / Feeder Permit Issuance - Active

    RENEW OLD PERMIT- 07COM-00087

    Permit
    10ELC-03504
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $145
    Contractor
    Direct Contractors
    Days from application to issue
    0
  31. Permit Electrical Service / Circuit / Feeder Permit Issuance - Active

    RENEW OLD PERMIT- 07COM-00087

    Permit
    10ELC-03505
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $145
    Contractor
    Direct Contractors
    Days from application to issue
    0
  32. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    09ELC-10694
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $150
    Contractor
    Direct Contractors
    Days from application to issue
    10
  33. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    09ELC-10695
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $150
    Contractor
    Direct Contractors
    Days from application to issue
    10
  34. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    09ELC-10696
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $150
    Contractor
    Direct Contractors
    Days from application to issue
    10
  35. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    09ELC-10697
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $135
    Contractor
    Direct Contractors
    Days from application to issue
    10
  36. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    09ELC-10698
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $135
    Contractor
    Direct Contractors
    Days from application to issue
    10
  37. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    09ELC-10699
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $135
    Contractor
    Direct Contractors
    Days from application to issue
    10
  38. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    09ELC-10700
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $135
    Contractor
    Direct Contractors
    Days from application to issue
    10
  39. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    09ELC-00678
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $105
    Contractor
    Direct Contractors
    Days from application to issue
    10
  40. Permit Construction Loop Application Acceptance - Approved

    TEMP POWER

    Permit
    08ELC-17850
    Type
    Construction Loop
    Work
    Construction Loop
    Estimated cost (applicant’s figure)
    $0
    Fees
    $51
    Contractor
    Direct Contractors
    Days from application to issue
    10
  41. Permit Emergency Permit State Fire Marshal Approval - Approved

    HURRICANE RELATED REPAIRS TO MAKE UNITS 1-7 LIVABLE TO INCLUDE, DRYWALL, CLEAN-UP AND OTHER REPAIRS AS NEEDED. 1026 CONTI ST

    Permit
    07COM-00087
    Type
    Emergency Permit
    Work
    NA
    Estimated cost (applicant’s figure)
    $7,000
    Fees
    $85
    Days from application to issue
    5
  42. Permit Electrical Repair / Replacement / Addition Inspection - Completed

    vacancy

    Permit
    05ELC-03469
    Type
    Electrical Repair / Replacement / Addition
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Margiotta Elec
    Days from application to issue
    10
  43. Permit Electrical Repair / Replacement / Addition Inspection - Completed

    SIX MONTH VACANCY

    Permit
    04ELC-06197
    Type
    Electrical Repair / Replacement / Addition
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Margiotta Elec
    Days from application to issue
    10
  44. Permit Electrical

    ELECTRICAL VACANCY REPAIRS APARTMENT HOUSE BARRY BODE

    Permit
    E02004578
    Type
    Electrical
    Days from application to issue
    0

    Placed here by the building address from “1026 CONTI ST UNIT 3”.

  45. Permit Electrical

    ELECTRICAL VACANCY REPAIRS SINGLE-FAMILY DWELLING VACANCY

    Permit
    E01005295
    Type
    Electrical
    Days from application to issue
    0

    Placed here by the building address from “1026 CONTI ST UNIT 3”.