St. Claude

1921 Gallier Street is in St. Claude, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). The city has 7 permits on record here; the most recent, a mechanical fuel gas permit, was filed in August 2018. 3 are still open. On this block in the past year: 9 requests to 311 and 29 calls to police.

Zoning
HU-RD2
Historic district
None
Council district
D
Ward
9
Lot size
3,180 sq ft
Parcel
41187045

Everything on record here

7 records, newest first · 3 open

  1. Permit Mechanical Fuel Gas Permit Finaled

    new gas line and water heater

    Permit
    18-26036-FGAS
    Type
    Mechanical Fuel Gas
    Work
    Mechanical Fuel Gas
    Estimated cost (applicant’s figure)
    $450
    Fees
    $40
    Days from application to issue
    1
    Expires
    Feb 8, 2019
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  2. Permit Renovation (Non-Structural) Occupancy

    (Extension and completion of 2012 permit. Work started by previous owner - then property vandalized.) Cleanup and renovation of house vacated after Katrina. Damaged plaster replaced with drywall and insulation installed, window and door replacement, kitchen and bath refinished. Floors refinished, siding repaired. Permits for HVAC, plumbing, gas, electrical filed by contractors.

    Permit
    18-25921-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $10,000
    Fees
    $110
    Days from application to issue
    24
    Expires
    Feb 28, 2019
    1. Application submitted
    2. First inspection
    3. Application review
    4. Zoning review
    5. Plan review
    6. Permit approved
    7. Issue date

    See this permit on One Stop

  3. Permit Electrical Service / Circuit / Feeder Permit Finaled

    125A, 14 circuits

    Permit
    18-25861-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $3,300
    Fees
    $120
    Contractor
    Elbred Malone
    Days from application to issue
    30
    Expires
    Mar 5, 2019
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  4. Permit Mechanical HVAC Permit Finaled

    Install 2 ton HVAC system

    Permit
    18-03535-HVAC
    Type
    Mechanical HVAC
    Work
    Mechanical HVAC
    Estimated cost (applicant’s figure)
    $3,000
    Fees
    $65
    Days from application to issue
    2
    Expires
    Aug 1, 2018
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  5. Permit Renovation (Non-Structural) Permit Issued

    SUPPLEMENT TO 08BLD-03560 TO COMPLETE REPAIRS TO EXISTING SINGLE.

    Permit
    12-29535-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $1,000
    Fees
    $65
    Days from application to issue
    0
    Expires
    May 5, 2013

    See this permit on One Stop

  6. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    09ELC-07455
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $96
    Contractor
    Malone Electrical
    Days from application to issue
    10
  7. Permit Emergency Permit Application Acceptance - Approved No Review

    REPAIRS TO A HURRICANE DAMAGED DWELLING

    Permit
    08BLD-03560
    Type
    Emergency Permit
    Work
    Emergency Permit
    Estimated cost (applicant’s figure)
    $10,000
    Fees
    $100
    Days from application to issue
    5