Holy Cross

6318 Bienvenue Street is in Holy Cross, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Holy Cross historic district under full HDLC control, so most exterior changes need approval first. The city has 7 permits on record here; the most recent, a mechanical fuel gas permit, was filed in October 2026. 6 are still open. There is 1 open code enforcement case. On this block in the past year: 5 requests to 311 and 2 calls to police.

Zoning
HU-RD2
Historic district
Holy Cross (Full control)
National Register
Holy Cross Historic District
Council district
E
Ward
9
Lot size
4,062 sq ft
Parcel
41187821

Everything on record here

8 records, newest first · 7 open

  1. Permit Mechanical Fuel Gas Other

    Tank-to-Tankless Water Heater Conversion : Tank-to-Tankless Water Heater Conversion Warranty * 12-Year Heat Exchanger Warranty * 5-Year Parts Warranty * 2-Year Labor Warranty * 1-Year Unit Warranty * Extended Labor Warranty: The labor warranty will be extended to 5 years with consistent annual flushing performed by Natals. Scope of Work Natals will furnish and install a new 199,000 BTU outdoor RUDD tankless water heater, converting the existing tank-style water heater system to a tankless system. Demolition and Removal * Shut off the water and gas supply to the existing water heater. * Drain and disconnect the existing tank water heater located inside the backyard shed. * Remove and haul away the existing water heater, vent piping, and shed. * Cap the existing water lines at the water heater location. * Cap the existing gas line at the 1-inch tee in front of the home that supplies the stove. * Discontinue use of the gas line running toward the backyard and properly cap the line. Tankless Water Heater Installation * Furnish and install one new 199,000 BTU outdoor RUDD tankless water heater. * Mount the new tankless unit on the left side of the home, near the existing gas meter. * Install up to 20 feet of galvanized piping to supply the new tankless water heater location. * Run up to 40 total feet of water piping

    Permit
    26-31540-FGAS
    Type
    Mechanical Fuel Gas
    Work
    Mechanical Fuel Gas
    Estimated cost (applicant’s figure)
    $6,198
    Fees
    $40
    Contractor
    Rodney Emerson Faucett
    Days from application to issue
    1
    Expires
    Apr 27, 2027
    1. Gas Line and Outlets Paid
    2. Water Heaters Paid
    3. Rough Mech Gas Res
    4. Water Heater
    5. Application Submitted Complete
    6. Application submitted
    7. Application Review Complete
    8. Permit Approved Complete
    9. Permit Issued Complete
    10. Mechanical Permit Review Complete
    11. Application review
    12. Permit approved
    13. Issue date
    14. Gas Line Passed
    15. First inspection
    16. Inspections Finaled Complete
    17. Certificate of Completion Complete
    18. Meter Release - Gas Complete
    19. Mechanical Permit Review Complete

    See this permit on One Stop

  2. Code enforcement Case 26-09616-MPM Inspection

    The case was filed on 08/19/2026 and the property is awaiting inspection to proceed further.

    1. Inspection
    2. Title Research
    3. Hearing
    4. Judgment
    5. In Compliance

    The city links this case to permit 26-31540-FGAS.

  3. Permit General Mechanical Inspection - Completed

    1 4ton (e) a/c ,wh & reconnect david #1596

    Permit
    09MCH-08797
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $115
    Contractor
    Ashby Hvac
    Days from application to issue
    5

    Placed here by a known alternate street name from “6318 Bienvenue”.

  4. Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved

    RECONNECT

    Permit
    09ELC-10797
    Type
    Electrical Repair / Replacement / Addition
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Curtis & Son's Electric
    Days from application to issue
    10
  5. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    08ELC-07199
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $84
    Contractor
    Curtis & Son's Electric
    Days from application to issue
    10
  6. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    07ELC-25324
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $96
    Contractor
    Thanh's Elec.
    Days from application to issue
    10
  7. Permit Residential APPROVAL

    Katrina Repairs

    Permit
    ACCELA-86896
    Type
    Residential
    Work
    Repair
    Estimated cost (applicant’s figure)
    $200,000
  8. Permit Accessory Structure Application Acceptance - Approved No Review

    REFOOF EXISTING SHED WITH 5-V CRIMP METAL ROOFING, & INCREASING PITCH(NOT TO EXCEED 14FT IN HEIGHT) AS PER HDLC C/A #H199.

    Permit
    05BLD-01311
    Type
    Accessory Structure
    Work
    Accessory Structure
    Estimated cost (applicant’s figure)
    $5,000
    Fees
    $-30
    Days from application to issue
    6