City Park
840 Ida Street is in City Park, zoned HU-RD1 (Older neighborhoods, two-family homes on smaller lots). It is in the Parkview historic district under partial HDLC control, where demolition needs HDLC review. The city has 6 permits on record here; the most recent, a renovation (non-structural) permit, was filed in November 2019. 1 is still open. On this block in the past year: 9 requests to 311 and 2 calls to police.
- Zoning
- HU-RD1
- Historic district
- Parkview (Partial control)
- National Register
- Parkview Historic District
- Council district
- A
- Ward
- 5
- Lot size
- 3,941 sq ft
- Parcel
- 41191879
Everything on record here
7 records, newest first · 1 open
-
Short-term rental Non-Commercial Short Term Rental license application Pending
- Type
- Non-Commercial Short Term Rental
- Operator
- Roger Amador
-
Permit Renovation (Non-Structural) Other
Non-structural renovation to 1305 sqft 2-story single family home. Scope of work inlcudes painting (interior and exterior), doors, cabinets, flooring, electrical, and plumibng (fixtures only). No exterior work to be done.
- Permit
- 19-36552-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $17,000
- Fees
- $145
- Contractor
- RE NEW ORLEANS PROPERTY MANAGEMENT LLC
- Days from application to issue
- 0
- Expires
- May 14, 2020
- Application submitted
- Application review
- Zoning review
- Permit approved
- Issue date
-
Permit Electrical Repair / Replacement / Addition Permit Finaled
adjust electrical panel, no added amps, 0 added circuits. Cut out cut in.
- Permit
- 19-16067-ERPR
- Type
- Electrical Repair / Replacement / Addition
- Work
- Electrical Repair / Replacement / Addition
- Estimated cost (applicant’s figure)
- $450
- Fees
- $100
- Contractor
- Elbred Malone
- Days from application to issue
- 0
- Expires
- Nov 17, 2019
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit Electrical Repair / Replacement / Addition Permit Finaled
replace 200A panel, 0 added circuits. Cut out cut in.
- Permit
- 19-16061-ERPR
- Type
- Electrical Repair / Replacement / Addition
- Work
- Electrical Repair / Replacement / Addition
- Estimated cost (applicant’s figure)
- $750
- Fees
- $100
- Contractor
- Elbred Malone
- Days from application to issue
- 0
- Expires
- Nov 17, 2019
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit Mechanical Fuel Gas Permit Finaled
6 mos no gas
- Permit
- 18-14968-FGAS
- Type
- Mechanical Fuel Gas
- Work
- Mechanical Fuel Gas
- Estimated cost (applicant’s figure)
- $275
- Fees
- $30
- Contractor
- Laporte Plumbing
- Days from application to issue
- 6
- Expires
- Nov 14, 2018
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit Mechanical Fuel Gas Permit Finaled
6mos no gas
- Permit
- 18-14956-FGAS
- Type
- Mechanical Fuel Gas
- Work
- Mechanical Fuel Gas
- Estimated cost (applicant’s figure)
- $0
- Fees
- $30
- Contractor
- Laporte Plumbing
- Days from application to issue
- 0
- Expires
- Nov 7, 2018
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved
storm damage
- Permit
- 05ELC-07994
- Type
- Electrical Repair / Replacement / Addition
- Work
- Repair-Replacement-Addition
- Estimated cost (applicant’s figure)
- $0
- Fees
- $30
- Contractor
- Schiro's Elec.Sev.
- Days from application to issue
- 10