Dillard

4428 Allen Street is in Dillard, zoned S-RS (Newer neighborhoods, single-family homes). The city has 10 permits on record here; the most recent, a plumbing permit, was filed in February 2024. 9 are still open. A demolition permit was filed in February 2007. There is 1 open code enforcement case. On this block in the past year: 1 request to 311 and 1 call to police.

Zoning
S-RS
Historic district
None
Council district
D
Ward
7
Lot size
8,789 sq ft
Parcel
41192569

Everything on record here

13 records, newest first · 10 open

  1. Code enforcement Case 26-11809-MPM Inspection

    The case was filed on 10/15/2026 and the property is awaiting inspection to proceed further.

    1. Inspection
    2. Title Research
    3. Hearing
    4. Judgment
    5. In Compliance

    The city links this case to permit 24-03715-PLMB.

  2. Permit Plumbing Permit Other

    Sewer Repair

    Permit
    24-03715-PLMB
    Type
    Plumbing Permit
    Work
    Plumbing Permit
    Estimated cost (applicant’s figure)
    $0
    Fees
    $100
    Contractor
    JAMES T BROUSSARD
    Days from application to issue
    1
    Expires
    Aug 8, 2024

    See this permit on One Stop

  3. Permit Electrical Permit Issuance Active

    RENOVATION (GARAGE)

    Permit
    11ELC-11070
    Type
    Electrical
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $67
  4. Permit Residential Permit Issuance Active

    CONSTRUCTION OF A 2040 S.F. GARAGE/STORAGE BUILDING AS PER SKETCH AND CITY PLANNING DKT.#150/10. NO PLUMBING ALLOWED.

    Permit
    11BLD-05040
    Type
    Residential
    Work
    Accessory Structure
    Estimated cost (applicant’s figure)
    $35,000
    Fees
    $235
  5. Code enforcement Case ENVHADJ-10-00730 Closed

    A hearing was held on 04/07/2010 with a result of "Found Guilty". The case was subsequently closed.

    1. Hearing: Initial Hearing Found Guilty
  6. Code enforcement Case ENVHC-09-00152 Closed

    The case was filed on 05/21/2009 but has since been closed without further action.

  7. Permit General Mechanical Application Acceptance - Approved

    METER OUT OVER SIX MONTHS. CARL TATE (#5026)

    Permit
    07MCH-08258
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Tate Construction & Service
    Days from application to issue
    5
  8. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    07ELC-13996
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $105
    Contractor
    Tate Const.& Services Inc.
    Days from application to issue
    10
  9. Permit Demolition Inspection - Completed No Requirements

    DEMOLISH VACANT RESIDENCE TO GRADE PER OWNERS REQUEST AND DEBRIS EREMOVAL WITHIN 72 HOURS OF THE DEMOLITION. OUTSIDE OF THE HDRC. A FINAL INSPECTION IS REQUIRED. A LICENSED PLUMBER MUST SECURE A SEPERATE PERMIT FROM THE SEWERAGE A WATER BOARD TO CAP OFF SEWER LINES AND REMOVE WATER METER PRIOR TO DEMOLITION . ANY FURTHER CONSTRUCTION WILL REQUIRE A SEPERATE PERMIT.-----house demolished to grade,concrete porch remains.

    Permit
    07BLD-01158
    Type
    Demolition
    Work
    Demolition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $125
    Contractor
    Phillips & Jordan, Inc.
    Days from application to issue
    5
  10. Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved

    House rewiring 100%, replace services with a 150amp.

    Permit
    06ELC-30075
    Type
    Electrical Repair / Replacement / Addition
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Contractor
    Tate Const.& Services Inc.
    Days from application to issue
    11
  11. Permit General Mechanical Certificate Of Completion - Issued No Meter

    Install 3ton condensor, 70,000 btuh warm air furnace, and ductwork.

    Permit
    06MCH-06514
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $-1
    Contractor
    Tate Construction & Services
    Days from application to issue
    24
  12. Permit General Mechanical Meter Release - Released

    6 months vacancy, installed approx. 20' gas line.

    Permit
    06MCH-06517
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $-1
    Contractor
    Tate Construction & Service
    Days from application to issue
    24
  13. Permit Residential APPROVAL

    Katrina Repairs

    Permit
    ACCELA-31247
    Type
    Residential
    Work
    Repair
    Estimated cost (applicant’s figure)
    $125,000