City Park
4021 Delgado Drive is in City Park, zoned HU-RD1 (Older neighborhoods, two-family homes on smaller lots). It is in the Parkview historic district under partial HDLC control, where demolition needs HDLC review. The city has 6 permits on record here; the most recent, a swimming pool permit, was filed in April 2011. 6 are still open. A demolition permit was filed in April 2011. On this block in the past year: 6 requests to 311 and 3 calls to police.
- Zoning
- HU-RD1
- Historic district
- Parkview (Partial control)
- National Register
- Parkview Historic District
- Council district
- A
- Ward
- 5
- Lot size
- 11,556 sq ft
- Parcel
- 41201244
Everything on record here
6 records, newest first · 6 open
-
Permit Swimming Pool Permit Issuance - Active
INSTALLATION OF A INGROUND POOL AS PER SKETCH AND THE N.O.COMPREHENSIVE ZONING ORDINANCE ARTICLE 15;SECTION 15.5.12;#7.
- Permit
- 11BLD-03484
- Type
- Swimming Pool
- Work
- Swimming Pool
- Estimated cost (applicant’s figure)
- $31,000
- Fees
- $215
- Days from application to issue
- 0
-
Permit Demolition Permit Issuance - Active
DEMOLITION TO GRADE OF A GARAGE AS PER OWNER'S REQUEST INSIDE OF THE NCDC DISTRICT. A LICENSCED PLUMBER MUST SECURE A PERMIT FROM SEWAGE AND WATER BOARD TO REMOVE WATER METER AND CAP SEWER LINE. ANY FUTURE USE REQUIRES A SEPERATE PERMIT. SINGLE FAMILY RESIDENCE TO REMAIN.
- Permit
- 11BLD-03108
- Type
- Demolition
- Work
- Demolition
- Estimated cost (applicant’s figure)
- $2,000
- Fees
- $105
- Days from application to issue
- 0
-
Permit General Mechanical Inspection - Completed
..T. NICOSIA PLB CONST - TOMMY NICOSIA - - CK#3434 - WATER HTR - METER OUT OVER 6 MOS
- Permit
- 09MCH-05481
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $50
- Contractor
- T.Nicosia Plb Const
- Days from application to issue
- 5
-
Permit General Mechanical Certificate Of Completion - Issued No Meter
INSTALL ELEC WAF AND 2-A\C UNIT. FRANK NATAL JR. (#20594)
- Permit
- 08MCH-01173
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $74
- Contractor
- Natals A/C
- Days from application to issue
- 5
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE
- Permit
- 07ELC-22833
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $192
- Contractor
- Bankston Electric
- Days from application to issue
- 10
-
Permit Construction Loop Application Acceptance - Approved
TEMP POLE
- Permit
- 07ELC-22777
- Type
- Construction Loop
- Work
- Construction Loop
- Estimated cost (applicant’s figure)
- $0
- Fees
- $30
- Contractor
- Bankston Electric
- Days from application to issue
- 10