Dillard

402 Warrington Drive is in Dillard, zoned S-RS (Newer neighborhoods, single-family homes). The city has 7 permits on record here; the most recent, a street cut permit, was filed in June 2019. 6 are still open. On this block in the past year: 8 requests to 311 and 9 calls to police.

Zoning
S-RS
Historic district
None
Council district
D
Ward
7
Lot size
4,988 sq ft
Parcel
41203462

Everything on record here

7 records, newest first · 6 open

  1. Permit Street Cut Other

    Place telecommunication innerduct

    Permit
    19-19200-RSTC
    Type
    Street Cut
    Work
    Street Cut
    Estimated cost (applicant’s figure)
    $0
    Fees
    $55
    Days from application to issue
    10
    Expires
    Dec 24, 2019

    See this permit on One Stop

  2. Permit Renovation (Structural) Certificate of Occupancy - Issued No Meter

    ELEVATION OF A SINGLE FAMILY DWELLING AS PER ELEVATION CERTIFICATE:0.30. "TO ELEVATE A EXISTING DWELLING A SET OF FOUNDATION PLANS PREPARED BY A LA.CIVIL ENGINEER MUST BE AT THE SITE FOR THE FOUNDATION INSPECTION". THE SITE MUST BE AT OR ABOVE THE 0.30 BFE.

    Permit
    11BLD-04214
    Type
    Renovation (Structural)
    Work
    Renovation (Structural)
    Estimated cost (applicant’s figure)
    $65,000
    Fees
    $385
    Days from application to issue
    0
  3. Permit General Mechanical Inspection - Completed

    *JOHN KELLY GAS-LINE W/H CK#2147

    Permit
    08MCH-11323
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $35
    Contractor
    Kelley's Plbg Ser
    Days from application to issue
    5
  4. Permit General Mechanical Inspection - Completed

    INSTALL GAS WAF AND 3-TON CONDENSER. HERMAN BONNETTE (#4592)

    Permit
    08MCH-08191
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $67
    Contractor
    Superior A/C & Heat
    Days from application to issue
    5
  5. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    08ELC-07879
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $162
    Contractor
    Superior A/C & Heat
    Days from application to issue
    10
  6. Permit Construction Loop Application Acceptance - Approved

    TEMP POLE

    Permit
    08ELC-07880
    Type
    Construction Loop
    Work
    Construction Loop
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Superior A/C & Heat
    Days from application to issue
    10
  7. Permit Emergency Permit Certificate of Occupancy - Issued No Meter

    HURRICANE REPAIR TO SINGLE FAMILY DWELLING

    Permit
    07BLD-01552
    Type
    Emergency Permit
    Work
    Emergency Permit
    Estimated cost (applicant’s figure)
    $25,000
    Fees
    $175
    Days from application to issue
    5