Bywater

640 Piety Street is in Bywater, zoned HMR-3 (Marigny, Tremé and Bywater single- and two-family homes, with some small multi-family buildings). It is in the Bywater historic district under full HDLC control, so most exterior changes need approval first. The city has 15 permits on record here; the most recent, an HDLC COA permit, was filed in December 2019. 11 are still open. A demolition permit was filed in October 2014. On this block in the past year: 0 requests to 311 and 13 calls to police.

Zoning
HMR-3
Historic district
Bywater (Full control)
National Register
Bywater Historic District
Council district
C
Ward
9
Lot size
2,118 sq ft
Parcel
41219002

Everything on record here

15 records, newest first · 11 open

  1. Permit HDLC COA Permit Cancelled

    A few years ago I purchased a house at 640 Piety St., which has a one-car garage nestled against the west and south property lines. The building was never completed and is falling into disrepair. The exterior has decomposing sheathing that never got the weatherboard installed over it, and the roof decking has no shingles or metal covering. I’d like to replace the sheathing and finish the outside of the building with reclaimed siding, a galvalume standing-seam roof, and a single-light 36” pedestrian entry door. The south and west walls will have fire-rated walls, and the east wall will include flood vents since the building is at grade. The vehicular garage door itself is already existing. I would also like to install a mini-split AC unit and a utility sink. NOTE: PLANS AND ELEVATIONS WILL NOT UPLOAD—THEY ARE SMALL PDF FILES (TRIED PNGs as well). Please advise. Thanks!

    Permit
    19-37409-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  2. Permit Renovation (Non-Structural) Other

    A few years ago I purchased a house at 640 Piety St., which has a one-car garage nestled against the west and south property lines. The building was never completed and is falling into disrepair. The exterior has decomposing sheathing that never got the weatherboard installed over it, and the roof decking has no shingles or metal covering. I’d like to replace the sheathing and finish the outside of the building with reclaimed siding, a galvalume standing-seam roof, and a single-light 36” pedestrian entry door. The south and west walls will have fire-rated walls, and the east wall will include flood vents since the building is at grade. The vehicular garage door itself is already existing. I would also like to install a mini-split AC unit and a utility sink. NOTE: PLANS AND ELEVATIONS WILL NOT UPLOAD—THEY ARE SMALL PDF FILES (TRIED PNGs as well). Please advise. Thanks!

    Permit
    19-37409-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $7,000
    Fees
    $143
    Contractor
    Rl Blum Construction
    1. Application submitted

    See this permit on One Stop

  3. Permit HDLC COA Permit Cancelled

    Retention of inappropriate front door

    Permit
    16-15809-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  4. Permit HDLC COA Other

    1. Crumbling vinyl siding: Remove 2. Smooth Hardie siding on river side elevation, partial front elevation: Install 3. Scavenged wooden siding from river elevation: install on Royal St. elevation to match existing 4. Revision of front elevation to historic conditions. Front was previously revised, likely in 40s, to "Arts & Crafts" style, including replacement of the original openings with a single 6’-8”-tall centered door with narrow sidelights. Cypress door and 6/6 sashes were found in shed, and are being restored, with header heights to match adjacent windows on side of house. Awaiting HDLC-provided detail for correct exterior profile of bargeboard window casing / trim. Attached annotated photos show interior structure, illustrating where original openings had been modified to make way for 6'8" opening. Note: Appealing to retain historic cypress door found in shed. 5. Restored metal awning on Royal St. Entrance, as per detail to be provided by HDLC. Remove plywood cover from transom, remove all iron gates / bars. Alternate design: Vintage-style scalloped sheet metal awning, similar to attached image. 6. New wooden louvered vent in rear gable opening to replace current plank infill that does not appear to be original. Proportions to remain. 7. Replace seal-tab roofing on rear room / lean-to; Alternate: metal roof. 8. Kitchen vent on Royal St. elevation, near kitchen door: Install 9. Security Light, river side elevation: Replace

    Permit
    16-13520-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    23
    Expires
    Nov 19, 2016

    See this permit on One Stop

  5. Permit Renovation (Non-Structural) Other

    remove vinyl siding, replace with Hardi siding and wood siding; remodel front elevation; new roof, etc.

    Permit
    16-13520-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $6,000
    Fees
    $135

    See this permit on One Stop

  6. Permit Demolition Permit Issued

    Demolition of existing shed in order to make way for new garage as per HDLC C/A # 14-30633-HDLC. There may be an associated address on this project if there is any confusion: 3212 Royal St.

    Permit
    14-28299-DEMO
    Type
    Demolition
    Work
    Demolition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $150
    Days from application to issue
    0
    Expires
    Apr 2, 2015

    See this permit on One Stop

  7. Permit HDLC COA Permit Issued

    Demolition of existing shed in order to make way for new garage, the design of which is already approved by HDLC. There may be an associated address on this project if there is any confusion: 3212 Royal St.

    Permit
    14-30633-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Apr 2, 2015

    See this permit on One Stop

  8. Permit HDLC COA Permit Issued

    Reconstruction of a wood framed shed at the rear of a single family residential corner lot. Shed to have concrete slab, low sloped standing seam metal roof, corrugated metal cladding and bi-part outswing door. Shed to be directly adjacent to adjacent property's new CMU block shed. BZA granted zoning waiver to permit the structures to share the CMU wall as a fire rated assembly. No electrical, mechanical or plumbing associated with this shed. Scope of work includes re-cladding existing wood fence with corrugated metal panels salvaged from deconstruction of existing shed on site.

    Permit
    14-22680-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    23
    Expires
    Feb 28, 2015

    See this permit on One Stop

  9. Permit Accessory Structure Permit Issued

    Reconstruction of a wood framed shed at the rear of a single family residential corner lot. Shed to have concrete slab, low sloped standing seam metal roof, corrugated metal cladding and bi-part outswing door. Shed to be directly adjacent to adjacent property's new CMU block shed. BZA granted zoning waiver to permit the structures to share the CMU wall as a fire rated assembly. No electrical, mechanical or plumbing associated with this shed. Scope of work includes re-cladding existing wood fence with corrugated metal panels salvaged from deconstruction of existing shed on site.

    Permit
    14-22393-ACCS
    Type
    Accessory Structure
    Work
    Accessory Structure
    Estimated cost (applicant’s figure)
    $12,000
    Fees
    $270
    Contractor
    Wayne Troyer
    Days from application to issue
    76
    Expires
    Apr 2, 2015

    See this permit on One Stop

  10. Permit General Mechanical Inspection - Completed

    line & wh david #10379

    Permit
    09MCH-12318
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $35
    Contractor
    David Carter'd Plbg. LLC
    Days from application to issue
    5
  11. Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved

    VACANCY

    Permit
    09ELC-16895
    Type
    Electrical Repair / Replacement / Addition
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Timbaux Home Repair LLC
    Days from application to issue
    10
  12. Permit Residential APPROVAL

    Katrina Repairs

    Permit
    ACCELA-24059
    Type
    Residential
    Work
    Repair
    Estimated cost (applicant’s figure)
    $11,000
  13. Permit General Mechanical Inspection - Completed

    install gas waf and 3-ton a\c dean walters

    Permit
    04MCH-00337
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $67
    Contractor
    Dean's A/C & Heat
    Days from application to issue
    5
  14. Permit Electrical Service / Circuit / Feeder Inspection - Completed
    Permit
    04ELC-00227
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $87
    Contractor
    T.Harris Elec. LLC.
    Days from application to issue
    10
  15. Permit Electrical

    INCREASE OF SERVICE SINGLE-FAMILY DWELLING DON DAVIS

    Permit
    E02008152
    Type
    Electrical
    Days from application to issue
    0