Marigny

400 Marigny Street is in Marigny, zoned HM-MU (Marigny, Tremé and Bywater mix of light industrial, commercial and residential uses). It is in the Faubourg Marigny historic district under full HDLC control, so most exterior changes need approval first. The city has 8 permits on record here; the most recent, a street cut permit, was filed in March 2026. 4 are still open. On this block in the past year: 1 request to 311 and 16 calls to police.

Zoning
HM-MU
Historic district
Faubourg Marigny (Full control)
National Register
Faubourg Marigny Historic District
Council district
C
Ward
8
Lot size
27,845 sq ft
Parcel
41220847

Everything on record here

8 records, newest first · 4 open

  1. Permit Street Cut In Review

    DIRECTIONAL BORE: To install fiber optic cable for internet. Start: 29.961742, -90.055491 End: 29.962860, -90.051744

    Permit
    26-06039-RSTC
    Type
    Street Cut
    Work
    Street Cut
    Estimated cost (applicant’s figure)
    $0
    Fees
    $378
    Days from application to issue
    22
    Expires
    Sep 24, 2026

    See this permit on One Stop

  2. Permit Electrical Service / Circuit / Feeder Permit Issued

    Replace service stem and overhead feeder due to truck hitting the service drop. Will need to be an emergency reconnect

    Permit
    24-19097-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $1,600
    Fees
    $40
    Contractor
    Bryan Charles Achary
    Days from application to issue
    5
    Expires
    Dec 26, 2024
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date

    See this permit on One Stop

  3. Permit Street Cut Other

    Installation of gas mains and service lines

    Permit
    19-31144-RSTC
    Type
    Street Cut
    Work
    Street Cut
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    45
    Expires
    May 15, 2020

    See this permit on One Stop

  4. Permit Mechanical HVAC Permit Finaled

    replace existing refrigeration/condensers on roof top. Randolph Hebert (#4234)

    Permit
    16-19407-HVAC
    Type
    Mechanical HVAC
    Work
    Mechanical HVAC
    Estimated cost (applicant’s figure)
    $0
    Fees
    $90
    Contractor
    Randolph J Hebert Jr.
    Days from application to issue
    0
    Expires
    Dec 10, 2016

    See this permit on One Stop

    Placed here by the building address from “400 Marigny St ON ROOF”.

  5. Permit Electrical Repair / Replacement / Addition Permit Finaled

    UPGRADE ELECTRICAL SERVICE AND ADD CIRCUITS

    Permit
    15-11779-ERPR
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $400
    Contractor
    Brian Craig Schexnaydre
    Days from application to issue
    18
    Expires
    Nov 8, 2015

    See this permit on One Stop

  6. Permit Renovation (Non-Structural) Occupancy

    Remove (1) existing equipment cabinet, installation of (4) new cabinets, (3) new antennas; installation of (15) Remote Radio Units as per sketch.

    Permit
    13-02718-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $36,000
    Fees
    $360
    Days from application to issue
    0
    Expires
    Jul 28, 2013

    See this permit on One Stop

    Placed here by its tax bill number from “2214 N.Peters”.

  7. Permit Electrical

    INCREASE OF SERVICE MARKET INCREASE SERVICE AND 6 NEW CIRCUITS

    Permit
    E01006152
    Type
    Electrical
    Days from application to issue
    0
  8. Permit Mechanical

    INSTALL MECHANICAL EQUIPMENT COMMUNITY CENTER INSTALL TWO 10-TON WALK-IN COOLER TIMOTHY M. 888-0999

    Permit
    M01004682
    Type
    Mechanical
    Days from application to issue
    0