Audubon

919 Henry Clay Avenue is in Audubon, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Uptown historic district under partial HDLC control, where demolition needs HDLC review. The city has 17 permits on record here; the most recent, a lead-based paint form permit, was filed in August 2023. 11 are still open. There was 1 past code enforcement case, the latest in May 2018, all closed. On this block in the past year: 5 requests to 311 and 2 calls to police.

Zoning
HU-RD2
Historic district
Uptown (Partial control)
National Register
Uptown New Orleans Historic District
Council district
A
Ward
14
Lot size
5,470 sq ft
Parcel
41223776

Everything on record here

18 records, newest first · 11 open

  1. Permit Lead-Based Paint Form Permit Issued

    removal of exterior paint using containment or HEPA vacuum system

    Permit
    23-23548-LEAD
    Type
    Lead-Based Paint Form
    Work
    Lead-Based Paint Form
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Feb 25, 2024
    1. Application submitted
    2. Issue date

    See this permit on One Stop

  2. Code enforcement Case 18-03613-MPM Closed

    The case was filed on 05/03/2018 but has since been closed without further action.

    The city links this case to permit 23-23548-LEAD.

  3. Permit Electrical Repair / Replacement / Addition Permit Finaled

    Convert Service from Overhead to Underground Increase Service from 100 amp to 200 amp

    Permit
    14-21161-ERPR
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $100
    Contractor
    Timothy Blanchard
    Days from application to issue
    2
    Expires
    Jan 11, 2015

    See this permit on One Stop

  4. Permit General Mechanical Permit Finaled

    rll-v-marcotte-415-3566-gas-line-1-generator-meter-increase

    Permit
    14-20913-MECH
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $80
    Contractor
    Vernon Marcotte
    Days from application to issue
    0
    Expires
    Jan 7, 2015

    See this permit on One Stop

  5. Permit Permanent Generator Permit Finaled

    Install generator

    Permit
    14-19017-EGEN
    Type
    Permanent Generator
    Work
    Permanent Generator
    Estimated cost (applicant’s figure)
    $5,600
    Fees
    $84
    Days from application to issue
    61
    Expires
    Feb 18, 2015

    See this permit on One Stop

  6. Permit Electrical Repair / Replacement / Addition Permit Finaled

    Changing Main Disconnect. Change Service from overhead to underground. 14-16520-RNVN

    Permit
    14-19018-ERPR
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $70
    Days from application to issue
    21
    Expires
    Jan 9, 2015

    See this permit on One Stop

  7. Permit Renovation (Non-Structural) Inspection Phase

    Install 20kw natural gas powered generator in back yard as per sketch. (919-21)

    Permit
    14-16520-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $7,000
    Fees
    $95
    Days from application to issue
    0
    Expires
    Nov 28, 2014

    See this permit on One Stop

  8. Permit Electrical Service / Circuit / Feeder Permit Finaled

    Work Descripton: RELOCATE SERVICE Historical Import Type: Permits Electrical Residential Service-Circuits-Feeders User: DMFOLEY Tracking: 86146288694 Status: Permit Issuance Active Status Date: 1/31/2012 12:00:00 AM Owner: Seastrunk Jay W III Owner Address: 919 Henry Clay Ave, New Orleans, LA 70118 Owner Edited By: 1/31/2012 by DMFOLEY

    Permit
    12ELC-01329
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $100
    Contractor
    All Star Electric,I Nc
    Days from application to issue
    0
    Expires
    Jul 31, 2012

    See this permit on One Stop

  9. Permit Electrical Permit Issuance Active

    REWIRE-07BLD-11717- TAKE OVER JOB FROM CIRCUIT SOLUTIONS WHO IS NO LONGER AFFILIATED WITH THIS ADDRESS AS PER OWNER EFFECTIVE 08/15/2011. SEE ATTACHED.

    Permit
    11ELC-08830
    Type
    Electrical
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $160
  10. Permit General Mechanical Inspection - Completed

    new gasline/gas w/heater/hector /ck#001.

    Permit
    10MCH-00977
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $35
    Contractor
    Lopez Mechanical Inc.
    Days from application to issue
    5
  11. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE- 07BLD-11717

    Permit
    09ELC-14129
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $150
    Contractor
    Circuit Solutions
    Days from application to issue
    10
  12. Permit General Mechanical Certificate Of Completion - Issued No Meter

    INSTALL GAS WAF AND 3-TON CONDENSER. RONNIE BLANCHER (#20563)

    Permit
    09MCH-07454
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $67
    Contractor
    Ed Blancher Ser
    Days from application to issue
    5
  13. Permit General Mechanical Inspection - Completed

    rll-l-bienvenu-835-7783-meter-increase-ck-022435

    Permit
    08MCH-02067
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Bienvenu Brothers Enterprises
    Days from application to issue
    5

    Placed here by a known alternate street name from “919 Henry Clay”.

  14. Permit Renovation (Non-Structural) Certificate of Occupancy - Issued No Meter

    NON-STRUCTURAL RENOVATIONS TO EXISTING 1-STRY DOUBLE (919-21). WORK WILL TAKE PLACE IN UNIT 921 ONLY.

    Permit
    07BLD-11717
    Type
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $50,000
    Fees
    $300

    Placed here by a known alternate street name from “919 Henry Clay”.

  15. Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved

    RECONNECT

    Permit
    06ELC-23072
    Type
    Electrical Repair / Replacement / Addition
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Chilson Electrec Co.
    Days from application to issue
    10

    Placed here by a known alternate street name from “921 Henry Clay”.

  16. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    NEW SERVICE

    Permit
    06ELC-23018
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $90
    Contractor
    Chilson Electrec Co.
    Days from application to issue
    10

    Placed here by a known alternate street name from “919 Henry Clay”.

  17. Permit Mechanical

    INSTALL MECHANICAL EQUIPMENT DOUBLE RESIDENCE INSTALL GAS LINE , GAS WARM AIR FURNACE AND 4-TON A\C. THOMAS MC GINNIS - 392-9737

    Permit
    M01001179
    Type
    Mechanical
    Days from application to issue
    0
  18. Permit Mechanical

    INSTALL MECHANICAL EQUIPMENT DOUBLE RESIDENCE INSTALL GAS LINE, GAS WARM AIR FURNACE AND 2-TON A\C THOMAS MC GINNIS - 392-9737

    Permit
    M01001180
    Type
    Mechanical
    Days from application to issue
    0